Tialn/AlCrN coatings in dry turning of Inconel 718
Inconel 718 is difficult to machine because its high-temperature mechanical strength and low thermal conductivity intensify thermo-mechanical loading at the cutting edge. This experimental study examines flank wear and material removal rate (MRR) during dry longitudinal turning with commercial TiAlN/AlCrN-coated inserts. The complete 3 × 3 × 3 factorial dataset comprises 27 machining trials at spindle speeds of 800–900 rev/min, feeds of 0.15–0.25 mm/rev, and three paired depth-of-cut/nose-radius settings (1.0/0.4, 1.5/0.8, and 2.0/1.2 mm). The nominal workpiece diameter was 45 mm for all trials and was used to calculate MRR using MRR = πDNfa p . Because depth of cut and nose radius changed together, their combined influence is represented by one paired engagement/geometry factor. Spindle speed was the largest wear-related main effect (30.5% of total variation), and the speed–feed interaction accounted for 37.7%. Based on the calculated MRR values, the paired factor and feed accounted for 61.0% and 34.3% of the factorial sum of squares, respectively. The flank-wear model gave R 2 = 0.6385 and leave-one-out Q 2 = 0.1916, while the recalculated-MRR model gave R 2 = 0.9999 and Q 2 = 0.9998. The minimum measured flank wear was 0.336 mm; the minimum and maximum calculated MRR values were 16,964.6 and 63,617.3 mm 3 /min, respectively. Optical and scanning electron microscopy revealed adhered work material, abrasive grooves, edge rounding, wear debris, and localized coating damage. The results describe the machining-response trends within the investigated range.
Authors
- R. Venkatesh (ORCID: https://orcid.org/0000-0001-8332-1974)
Publication Details
- Journal
- Surface Engineering
- Published
- 2026-11-17
- DOI
- https://doi.org/10.1177/02670844261508237
- Primary Topic
- Advanced machining processes and optimization
- Type
- article
- Field-Weighted Citation Impact
- 0.00