Properties of Graphene Directly Induced by Laser on Polyimides Synthesized with Different Cross-Linkers

Graphene is a conductive material that is increasingly being considered as an electrode for energy storage applications. The properties of graphene-based electrodes depend on the type of graphene, as well as on the properties of the substrate. This study focuses on graphene induced by laser directly on chemically tailored crosslinked polyimides (PI). The PI chemical structure is tuned to optimize the properties of laser-induced graphene (LIG) for supercapacitor applications. Three new PIs containing 4,4′-methylenedianiline (MDA), 1,6-hexamethylenediamine (HMDA), and thiourea (TU) as crosslinkers were synthesized by high-temperature polymerization in solution and used as matrices for LIG. Glycerol was used as a plasticizer in HMDA-based PI synthesis to prevent structural cracking, which yielded continuous graphene on this substrate (PI-HMDAg). The prepared LIG/PI materials were characterized in terms of their structural, morphological, surface, mechanical, electrical, and electrochemical properties and compared with previously prepared LIG/PI materials and LIG on Kapton. Water contact angle measurements demonstrated that hydrophilic LIG can be obtained simply by changing the crosslinker, without additional surface treatment. Very low sheet resistance was achieved, reaching 12.8 Ω/sq for LIG/PI-HMDAg. At 10 mV/s, specific areal capacitance reached 5.89 mF/cm2 for LIG/PI-HMDAg, exceeding the values obtained for the other investigated materials. The results showed that the PI structure and synthesis conditions strongly influence the properties of LIG, while the successful use of glycerol opens a new research direction toward a more sustainable, environmentally friendly, and flexible PI substrate for next-generation energy-storage devices.

Authors

Institutions

Publication Details

Journal
Polymers
Published
2026-11-17
DOI
https://doi.org/10.3390/polym18222879
Primary Topic
Graphene research and applications
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Properties of Graphene Directly Induced by Laser on Polyimides Synthesized with Different Cross-Linkers

Katarina Tosic, Marko Spasenović, Danica Bajuk‐Bogdanović, Marija V. Pergal et al.
3 links
Polymers
Graphene research and applications
article

Properties of Graphene Directly Induced by Laser on Polyimides Synthesized with Different Cross-Linkers

Katarina Tosic, Marko Spasenović, Danica Bajuk‐Bogdanović, Marija V. Pergal, Marko V. Bošković, Igor A. Pašti
article en

Abstract

Graphene is a conductive material that is increasingly being considered as an electrode for energy storage applications. The properties of graphene-based electrodes depend on the type of graphene, as well as on the properties of the substrate. This study focuses on graphene induced by laser directly on chemically tailored crosslinked polyimides (PI). The PI chemical structure is tuned to optimize the properties of laser-induced graphene (LIG) for supercapacitor applications. Three new PIs containing 4,4′-methylenedianiline (MDA), 1,6-hexamethylenediamine (HMDA), and thiourea (TU) as crosslinkers were synthesized by high-temperature polymerization in solution and used as matrices for LIG. Glycerol was used as a plasticizer in HMDA-based PI synthesis to prevent structural cracking, which yielded continuous graphene on this substrate (PI-HMDAg). The prepared LIG/PI materials were characterized in terms of their structural, morphological, surface, mechanical, electrical, and electrochemical properties and compared with previously prepared LIG/PI materials and LIG on Kapton. Water contact angle measurements demonstrated that hydrophilic LIG can be obtained simply by changing the crosslinker, without additional surface treatment. Very low sheet resistance was achieved, reaching 12.8 Ω/sq for LIG/PI-HMDAg. At 10 mV/s, specific areal capacitance reached 5.89 mF/cm2 for LIG/PI-HMDAg, exceeding the values obtained for the other investigated materials. The results showed that the PI structure and synthesis conditions strongly influence the properties of LIG, while the successful use of glycerol opens a new research direction toward a more sustainable, environmentally friendly, and flexible PI substrate for next-generation energy-storage devices.

PolymersVol. 18(22)
Serbian Academy of Sciences and Arts (RS), University of Belgrade (RS), Institute of Chemistry, Technology and Metallurgy (RS)
Science Fund of the Republic of Serbia
Affordable and clean energy
Graphene research and applications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon