In Situ Pore Generation in Clay via Co‐pyrolysis With Biomass Feedstocks: Toward Low‐Cost Adsorbents for Pollutant Control
ABSTRACT Clay is abundant and low‐cost; yet its limited porosity greatly restricts its use in adsorption‐based pollutant control. Here, we propose an in situ pore‐generation strategy by co‐pyrolyzing clay with biomass feedstocks. During pyrolysis, biomass releases volatiles and undergoes shrinkage, which can create channels and voids within the surrounding clay matrix. To verify this concept, clay was co‐pyrolyzed with sawdust, cellulose, lignin, poplar leaves, banana peels, flour, and bio‐oil at 700°C–900°C. Pyrolysis of clay alone produced a residue with negligible porosity ( S BET = 1.3 m 2 ·g −1 ), whereas co‐pyrolysis with biomass increased S BET to 18.2–287.5 1.3 m 2 ·g −1 and markedly promoted pore development. Biomass composition strongly influenced the pore structure: sawdust, cellulose, and lignin mainly generated microporous composites, whereas feedstocks richer in aliphatic structures favored mesopore formation. In situ DRIFTS showed that the evolution of the clay/char composite was governed by biomass decomposition, and that secondary condensation of volatiles formed hydrophobic carbonaceous deposits on the surface. Overall, this work demonstrates a simple and effective route for converting low‐porosity clay into porous clay/char composites with tunable pore structures, offering promise as low‐cost adsorbents for the control of hazardous organic contaminants and related environmental risk mitigation.
Authors
- Mortaza Gholizadeh (ORCID: https://orcid.org/0000-0001-6316-9901)
- Mengjiao Fan
- Qianqian Jiang (ORCID: https://orcid.org/0009-0003-5491-5011)
- Xun Hu (ORCID: https://orcid.org/0000-0003-4329-2050)
- Shu Zhang (ORCID: https://orcid.org/0000-0003-4137-0748)
- Chao Li (ORCID: https://orcid.org/0000-0003-4992-3247)
- Li Qiu
Institutions
- Nanjing Forestry University (CN)
- University of Jinan (CN)
- Fundació CTM Centre Tecnològic (ES)
- Shandong Provincial Hospital (CN)
- Shandong First Medical University (CN)
Publication Details
- Journal
- Safety Science and Technology
- Published
- 2026-11-16
- DOI
- https://doi.org/10.1002/sst3.70058
- Primary Topic
- Adsorption and biosorption for pollutant removal
- Type
- article
- Field-Weighted Citation Impact
- 0.00