Optical properties analysis of a graphene oxide layer deposited between air and a dielectric substrate

This study aims to systematically investigate and quantify the influence of graphene oxide (GO) film thickness, spectral width, chemical reduction time, and substrate refractive index on the optical response of the system. A transfer matrix method was employed to model the optical response over the ultraviolet–visible spectral range of 200–800 nm for GO thicknesses of 50–90 nm, spectral-width parameters σ G O = 40 –80 nm, reduction times of 0–1 h, and substrate refractive-index dispersion of 1.5–3.46. Transmittance, reflectance, absorptance, optical phase, phase time, and group velocity were evaluated. The results demonstrate strong parameter-dependent optical behavior, particularly in the UV region. Increasing the GO thickness from 50 to 90 nm reduces the UV transmittance from approximately 0.25 to below 0.15 and produces an optical phase variation of up to approximately 2 rad, indicating enhanced phase accumulation and dispersion. Increasing the spectral-width parameter σ G O from 40 to 80 nm modifies the modeled extinction profile, particularly in the UV region, and consequently affects the calculated transmittance and absorptance. The substrate also strongly influences the optical response. A high-refractive-index T i O 2 substrate provides visible-range transmittance exceeding approximately 0.70 under the investigated conditions owing to modified optical matching and interference at the GO/substrate interface. Within the adopted phenomenological model, increasing the reduction-time parameter from 0 to 1 h produces lower transmittance and higher absorptance, with the strongest changes occurring in the near-UV/blue spectral region, while also modifying the phase-time and phase-derived group-velocity responses. Overall, the results demonstrate that thickness, spectral width, reduction state, and substrate optical properties provide complementary degrees of freedom for tailoring the amplitude, phase, and dispersive response of GO thin films. These findings provide quantitative guidance for assessing and tuning the optical response of GO-based photonic, optoelectronic, and sensing structures.

Authors

Institutions

Publication Details

Journal
Frontiers in Physics
Published
2026-11-17
DOI
https://doi.org/10.3389/fphy.2026.1979505
Primary Topic
Graphene research and applications
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Optical properties analysis of a graphene oxide layer deposited between air and a dielectric substrate

Driss Bria, Youssef Ben-Ali, Mohammed Rasheed, Jamal Barkani et al.
Frontiers in Physics
Graphene research and applications
article

Optical properties analysis of a graphene oxide layer deposited between air and a dielectric substrate

Driss Bria, Youssef Ben-Ali, Mohammed Rasheed, Jamal Barkani, Khedr Abohassan, Basma Maachi
article en

Abstract

This study aims to systematically investigate and quantify the influence of graphene oxide (GO) film thickness, spectral width, chemical reduction time, and substrate refractive index on the optical response of the system. A transfer matrix method was employed to model the optical response over the ultraviolet–visible spectral range of 200–800 nm for GO thicknesses of 50–90 nm, spectral-width parameters σ G O = 40 –80 nm, reduction times of 0–1 h, and substrate refractive-index dispersion of 1.5–3.46. Transmittance, reflectance, absorptance, optical phase, phase time, and group velocity were evaluated. The results demonstrate strong parameter-dependent optical behavior, particularly in the UV region. Increasing the GO thickness from 50 to 90 nm reduces the UV transmittance from approximately 0.25 to below 0.15 and produces an optical phase variation of up to approximately 2 rad, indicating enhanced phase accumulation and dispersion. Increasing the spectral-width parameter σ G O from 40 to 80 nm modifies the modeled extinction profile, particularly in the UV region, and consequently affects the calculated transmittance and absorptance. The substrate also strongly influences the optical response. A high-refractive-index T i O 2 substrate provides visible-range transmittance exceeding approximately 0.70 under the investigated conditions owing to modified optical matching and interference at the GO/substrate interface. Within the adopted phenomenological model, increasing the reduction-time parameter from 0 to 1 h produces lower transmittance and higher absorptance, with the strongest changes occurring in the near-UV/blue spectral region, while also modifying the phase-time and phase-derived group-velocity responses. Overall, the results demonstrate that thickness, spectral width, reduction state, and substrate optical properties provide complementary degrees of freedom for tailoring the amplitude, phase, and dispersive response of GO thin films. These findings provide quantitative guidance for assessing and tuning the optical response of GO-based photonic, optoelectronic, and sensing structures.

Frontiers in PhysicsVol. 14
University of Technology - Iraq (IQ), Mohamed I University (MA), Dhofar University (OM), Sidi Mohamed Ben Abdellah University (MA)
Centre National pour la Recherche Scientifique et Technique
Graphene research and applications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon