Flexible-Sensor-Based Measurement of Rail-Pad Dynamic Load Amplification near the Critical Speed of Ballastless Track

This study investigates critical-speed amplification, stress transfer and rail-pad dynamic load response of CRTS I ballastless track under ultra-high-speed train loads. A three-dimensional vehicle–track–subgrade coupled finite-element model was developed for a CRH380B train and compared with field measurements from the Beijing–Tianjin Intercity line. The direct displacement-amplitude method identifies a displacement-peak speed of approximately 109 m/s for the ideal track–subgrade system. Full-scale tests show a non-monotonic slab-acceleration response, with a main peak near 396 km/h and a secondary peak near 325 km/h. Flexible-sensor measurements over multiple train speeds also show a non-monotonic rail-pad load response, with the maximum measured load occurring near 396 km/h. Numerical results at 110 and 180 m/s indicate that the track slab mainly carries vertical compression and longitudinal tension, whereas the CA mortar layer mainly carries vertical compression and shear. A quantitative fatigue assessment based on the adopted 2 × 106 reference load cycles gives track-slab fatigue utilisation ratios of 0.273 and 0.325 at 110 and 180 m/s, respectively, and a CA-mortar Miner damage index of approximately 2.32 × 10−7 under the most severe calculated compressive stress. These nominal fatigue indices are conditional on the adopted stress inputs and S–N extrapolation and do not establish field service life. The combined numerical and sensing results indicate a common speed range of amplification at both the global structural scale and the local rail-pad load-transfer scale.

Authors

Institutions

Publication Details

Journal
Sensors
Published
2026-11-17
DOI
https://doi.org/10.3390/s26227253
Primary Topic
Railway Engineering and Dynamics
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Flexible-Sensor-Based Measurement of Rail-Pad Dynamic Load Amplification near the Critical Speed of Ballastless Track

Guanwen Liang, Chengpeng Hong, Zhangbo Wan, Tong Lin et al.
2 links
Sensors
Railway Engineering and Dynamics
article

Flexible-Sensor-Based Measurement of Rail-Pad Dynamic Load Amplification near the Critical Speed of Ballastless Track

Guanwen Liang, Chengpeng Hong, Zhangbo Wan, Tong Lin, Xinyi Zhu, Haoran Fu, Weibin Liu, Qian Zhang
article en

Abstract

This study investigates critical-speed amplification, stress transfer and rail-pad dynamic load response of CRTS I ballastless track under ultra-high-speed train loads. A three-dimensional vehicle–track–subgrade coupled finite-element model was developed for a CRH380B train and compared with field measurements from the Beijing–Tianjin Intercity line. The direct displacement-amplitude method identifies a displacement-peak speed of approximately 109 m/s for the ideal track–subgrade system. Full-scale tests show a non-monotonic slab-acceleration response, with a main peak near 396 km/h and a secondary peak near 325 km/h. Flexible-sensor measurements over multiple train speeds also show a non-monotonic rail-pad load response, with the maximum measured load occurring near 396 km/h. Numerical results at 110 and 180 m/s indicate that the track slab mainly carries vertical compression and longitudinal tension, whereas the CA mortar layer mainly carries vertical compression and shear. A quantitative fatigue assessment based on the adopted 2 × 106 reference load cycles gives track-slab fatigue utilisation ratios of 0.273 and 0.325 at 110 and 180 m/s, respectively, and a CA-mortar Miner damage index of approximately 2.32 × 10−7 under the most severe calculated compressive stress. These nominal fatigue indices are conditional on the adopted stress inputs and S–N extrapolation and do not establish field service life. The combined numerical and sensing results indicate a common speed range of amplification at both the global structural scale and the local rail-pad load-transfer scale.

SensorsVol. 26(22)
Zhejiang Sci-Tech University (CN), Zhejiang University (CN)
National Natural Science Foundation of China
Industry, innovation and infrastructure
Railway Engineering and Dynamics
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon