Explainable Machine Learning for Multi-Response Structural Performance Prediction of Additively Manufactured PrinTimber Composite Beams
Additively manufactured structural composites exhibit geometry-dependent responses that require both accurate prediction and defensible validation. This study develops a robustness-aware explainable machine-learning framework for apparent modulus of elasticity (MOEapp), modulus of rupture (MOR), and nominal maximum section shear stress (τmax) of extrusion-printed PrinTimber composite beams. An ABAQUS finite-element framework benchmarked against single- and two-layer beams was extended to 100 configurations spanning 1–10 layers, widths of 42 mm and 84 mm, and span-to-depth ratios (S/D) of 6–30. Because span-to-width ratio is an exact deterministic function of the primary geometry, the analysis uses the independent predictor set [layer count, width, S/D]. Seven surrogates—linear regression, quadratic response-surface modeling, Random Forest, artificial neural network, XGBoost, LightGBM, and Gaussian-process regression—were compared under nested cross-validation with matched tuning budgets. XGBoost gave the highest out-of-fold R2 for all three responses: MOEapp (0.964), MOR (0.702), and τmax (0.836). Across 50 repeated holdouts, it remained most stable for MOEapp (0.941 ± 0.042) and τmax (0.833 ± 0.119), while MOR stayed partition-dependent. Repeated SHAP over 50 partitions identified S/D as dominant for MOEapp (76.4%) and τmax (74.5%) and coupled layer-count/S/D control for MOR. A local ±20% cohesive-parameter perturbation changed predicted ultimate load by, at most, 2%. The framework supports interpretable screening within the modeled design domain while separating numerical-surrogate accuracy from experimental generalization.
Authors
- Ahmed A. Ibrahim (ORCID: https://orcid.org/0000-0002-3039-4560)
- Hojat Hematabadi (ORCID: https://orcid.org/0000-0002-7795-9290)
Institutions
- University of Idaho (US)
Publication Details
- Journal
- Buildings
- Published
- 2026-11-17
- DOI
- https://doi.org/10.3390/buildings16224576
- Primary Topic
- Machine Learning in Materials Science
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- National Science Foundation