Microfabrication Techniques of Hydrogel Structures and Their Biocompatibility Studied Through the Integration of Living Cells

Developing stable, biocompatible outer bio-encapsulations remains a critical challenge in establishing reliable, long-term neural interfaces that achieve peripheral nerve regeneration and prevent signal degradation without triggering host immune rejection. We evaluate the metabolic viability of various candidate hydrogels via in vitro integration of living cell cultures, identifying the most viable formulation as optimal. The novelty lies in the synergistic optimization of a biomimetic scaffold that serves simultaneously as a high-fidelity electrical interface and a regenerative matrix. Our hypothesis is that the integration of living cells within the optimal hydrogel matrix significantly mitigates the foreign body response (FBR) while maximizing axonal alignment and signal transduction efficiency. The study explores microfabrication techniques for biocompatible hydrogel structures using 3D bioprinting technology, which are essential for integrating electronic devices into the human body without triggering rejection reactions. Using the CellInk BioX bioprinter, cubic and tubular structures were fabricated and tested using various types of hydrogels: standard gelatin methacrylate (GelMA), GelMA_A, GelMA_C, and BioInk. The aim was to create a biocompatible protective encapsulation for an implantable chip. The study included complex in vitro experiments, testing materials by submersion in saline solutions (simulating human body fluids) and by inoculation with living cells (neurons), and comparing the effects of UV and ionic crosslinking treatments on structural stability and cell viability. The experiments revealed distinct material behaviors: BioInk and standard GelMA dissolved rapidly in the saline environment, becoming unsuitable for implant protection. Although GelMA_A demonstrated shape fidelity, it failed to support cellular life, reaching just a 10% viability rate. In contrast, the treated GelMA_C variant demonstrated superior results, as viability was significantly higher than the other materials, maintaining its structural integrity in the aqueous environment and ensuring a high cell viability rate of between 70% and 85%, values close to the control sample. The novelty of the work lies in the identification and experimental validation of the GelMA_C hydrogel as the optimal material that resolves the critical trade-off between the mechanical strength necessary to protect implantable electronics and the ability to actively support cellular regeneration. It was demonstrated that using GelMA_C, together with a specific crosslinking protocol, offers a stable and bio-friendly interface, superior to other commercial variants, paving the way for in vivo applications in regenerative bioelectronics.

Authors

Institutions

Publication Details

Journal
Bioengineering
Published
2026-11-17
DOI
https://doi.org/10.3390/bioengineering13111371
Primary Topic
3D Printing in Biomedical Research
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Microfabrication Techniques of Hydrogel Structures and Their Biocompatibility Studied Through the Integration of Living Cells

Bogdan Fîrtat, Eduard Dan Franti, Carmen Aura Moldovan, Marian Ion et al.
1 links
Bioengineering
3D Printing in Biomedical Research
article

Microfabrication Techniques of Hydrogel Structures and Their Biocompatibility Studied Through the Integration of Living Cells

Bogdan Fîrtat, Eduard Dan Franti, Carmen Aura Moldovan, Marian Ion, Roxana Olimpia Gheorghe, Violeta Ristoiu, Adrian Gheorghe Barbilian, David Dragomir
article en

Abstract

Developing stable, biocompatible outer bio-encapsulations remains a critical challenge in establishing reliable, long-term neural interfaces that achieve peripheral nerve regeneration and prevent signal degradation without triggering host immune rejection. We evaluate the metabolic viability of various candidate hydrogels via in vitro integration of living cell cultures, identifying the most viable formulation as optimal. The novelty lies in the synergistic optimization of a biomimetic scaffold that serves simultaneously as a high-fidelity electrical interface and a regenerative matrix. Our hypothesis is that the integration of living cells within the optimal hydrogel matrix significantly mitigates the foreign body response (FBR) while maximizing axonal alignment and signal transduction efficiency. The study explores microfabrication techniques for biocompatible hydrogel structures using 3D bioprinting technology, which are essential for integrating electronic devices into the human body without triggering rejection reactions. Using the CellInk BioX bioprinter, cubic and tubular structures were fabricated and tested using various types of hydrogels: standard gelatin methacrylate (GelMA), GelMA_A, GelMA_C, and BioInk. The aim was to create a biocompatible protective encapsulation for an implantable chip. The study included complex in vitro experiments, testing materials by submersion in saline solutions (simulating human body fluids) and by inoculation with living cells (neurons), and comparing the effects of UV and ionic crosslinking treatments on structural stability and cell viability. The experiments revealed distinct material behaviors: BioInk and standard GelMA dissolved rapidly in the saline environment, becoming unsuitable for implant protection. Although GelMA_A demonstrated shape fidelity, it failed to support cellular life, reaching just a 10% viability rate. In contrast, the treated GelMA_C variant demonstrated superior results, as viability was significantly higher than the other materials, maintaining its structural integrity in the aqueous environment and ensuring a high cell viability rate of between 70% and 85%, values close to the control sample. The novelty of the work lies in the identification and experimental validation of the GelMA_C hydrogel as the optimal material that resolves the critical trade-off between the mechanical strength necessary to protect implantable electronics and the ability to actively support cellular regeneration. It was demonstrated that using GelMA_C, together with a specific crosslinking protocol, offers a stable and bio-friendly interface, superior to other commercial variants, paving the way for in vivo applications in regenerative bioelectronics.

BioengineeringVol. 13(11)
University of Bucharest (RO), Carol Davila University of Medicine and Pharmacy (RO), National Institute for Research and Development in Microtechnologies (RO)
Ministerul Cercetării, Inovării şi Digitalizării, European Commission, Unitatea Executiva pentru Finantarea Invatamantului Superior, a Cercetarii, Dezvoltarii si Inovarii
Good health and well-being
3D Printing in Biomedical Research
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon