Performance evaluation and field application of a coherent Doppler wind LiDAR for boundary layer wind profiling
Coherent Doppler wind LiDAR (DWL) has become an effective remote-sensing tool for continuous wind profile measurements in the atmospheric boundary layer. However, its field reliability and long-term observational performance under different meteorological conditions still require systematic validation. We evaluated the field performance of a commercial TAW-01 coherent Doppler wind LiDAR manufactured by Anhui Zhongke Tian’an Technology Co., Ltd., through comparison experiments with a meteorological gradient tower in Shenzhen and GTS14 radiosonde observations in Anqing from 2023 to 2025. The instrument retrieves wind profiles within a nominal measurement height range of 50 to 3500 m using velocity–azimuth display scanning. Compared with the meteorological gradient tower, the LiDAR showed good agreement in 10-min averaged horizontal wind speed and wind direction at five height levels. Averaged across these heights, the root mean square error (RMSE) for horizontal wind speed was 0.3268 m/s, with a mean correlation coefficient of 0.9793. For wind direction, the mean bias and RMSE calculated from circular angular differences were −1.9408 and 4.6918 deg, respectively. For four representative radiosonde comparisons, the RMSE values of horizontal wind speed and wind direction ranged from 0.627 to 0.848 m/s and from 4.302 to 9.307 deg, respectively. An expanded statistical comparison incorporating additional radiosonde observations showed altitude-dependent wind speed RMSE values of 0.7 to 2.2 m/s, with better agreement generally observed below 2.0 km. Long-term observations over Beijing from January to August 2025 revealed distinct monthly, vertical, and seasonal variations in the boundary layer wind field. A typical weather event from March 14 to 16, 2025, further demonstrated the capability of the system to capture airflow convergence, downdraft evolution, wind direction shear, and precipitation-related wind field changes. These results support the applicability of the TAW-01 DWL for boundary layer wind profile monitoring and related meteorological and engineering applications under conditions with sufficient aerosol backscatter.
Authors
- Xiaowei Xia (ORCID: https://orcid.org/0000-0002-6700-7595)
- Peng Zhuang (ORCID: https://orcid.org/0000-0001-8303-0640)
- Boqiang Fan (ORCID: https://orcid.org/0009-0001-3003-6501)
- Chenbo Xie
Institutions
- Chinese Academy of Sciences (CN)
- Tiandi Science & Technology (China) (CN)
- Anhui Institute of Optics and Fine Mechanics (CN)
- Key Laboratory of Atmospheric Optics, Chinese Academy of Sciences (CN)
- Chaohu University (CN)
Publication Details
- Journal
- Optical Engineering
- Published
- 2026-11-17
- DOI
- https://doi.org/10.1117/1.oe.65.11.114104
- Primary Topic
- Meteorological Phenomena and Simulations
- Type
- article
- Field-Weighted Citation Impact
- 0.00