Pyrolysis-Side Study for a Proposed Integrated Heavy-Oil Pyrolysis and Coke-Gasification Process: Effects of Temperature and Initial Syngas Pressure

A pyrolysis-side study was conducted to clarify how thermal severity and initial syngas pressure influence product redistribution and coke structure during heavy-oil conversion, providing experimental guidance for a proposed integrated pyrolysis–coke-gasification concept without claiming validation of the complete recycle process. Canadian oil-sands bitumen was pyrolyzed at 400–500 °C and initial syngas pressures of 0.5–5 MPa with a fixed CO/H2 volume ratio of 2:3. Pyrolysis temperature had the strongest effect on product distribution. As the temperature increased from 400 to 500 °C, the oil yield decreased from 46.67 to 22.13 wt %, while gas and coke yields increased. Approximately complete conversion was reached at 450 °C, whereas further heating mainly promoted secondary cracking and condensation. At 450 °C, increasing the initial syngas pressure from 0.5 to 5 MPa increased the oil yield from 29.86 to 35.53 wt % and reduced gas and coke yields by 3.62 and 2.05 wt %, respectively. The increase in liquid yield was mainly associated with an 11.72 wt % increase in VGO, accompanied by lower gasoline and diesel yields, indicating that higher pressure favored the retention of heavier liquid intermediates. Coke produced at higher temperatures was more condensed, more ordered, and less reactive, whereas higher syngas pressure resulted in a more disordered and functionalized carbon structure with higher oxidation reactivity. An exploratory composite structure–reactivity descriptor showed a strong within-data set association with the air-oxidation index (R2 = 0.9791; Q2LOO = 0.9498); however, the relationship is based on only eight unique operating conditions and requires external validation before predictive generalization. Considering conversion, product distribution, pressure severity, and coke reactivity, 450 °C and 1 MPa were retained as a reasonable bench-scale reference among the tested conditions, rather than as a temperature–pressure optimum.

Authors

Institutions

Publication Details

Journal
ACS Omega
Published
2026-11-18
DOI
https://doi.org/10.1021/acsomega.6c04959
Primary Topic
Petroleum Processing and Analysis
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Pyrolysis-Side Study for a Proposed Integrated Heavy-Oil Pyrolysis and Coke-Gasification Process: Effects of Temperature and Initial Syngas Pressure

Qing-an Xiong, Youjian Zhu, Kai Xie, Yuming Zhang et al.
1 links
ACS Omega
Petroleum Processing and Analysis
article

Pyrolysis-Side Study for a Proposed Integrated Heavy-Oil Pyrolysis and Coke-Gasification Process: Effects of Temperature and Initial Syngas Pressure

Qing-an Xiong, Youjian Zhu, Kai Xie, Yuming Zhang, Jiazhou Li
article en

Abstract

A pyrolysis-side study was conducted to clarify how thermal severity and initial syngas pressure influence product redistribution and coke structure during heavy-oil conversion, providing experimental guidance for a proposed integrated pyrolysis–coke-gasification concept without claiming validation of the complete recycle process. Canadian oil-sands bitumen was pyrolyzed at 400–500 °C and initial syngas pressures of 0.5–5 MPa with a fixed CO/H2 volume ratio of 2:3. Pyrolysis temperature had the strongest effect on product distribution. As the temperature increased from 400 to 500 °C, the oil yield decreased from 46.67 to 22.13 wt %, while gas and coke yields increased. Approximately complete conversion was reached at 450 °C, whereas further heating mainly promoted secondary cracking and condensation. At 450 °C, increasing the initial syngas pressure from 0.5 to 5 MPa increased the oil yield from 29.86 to 35.53 wt % and reduced gas and coke yields by 3.62 and 2.05 wt %, respectively. The increase in liquid yield was mainly associated with an 11.72 wt % increase in VGO, accompanied by lower gasoline and diesel yields, indicating that higher pressure favored the retention of heavier liquid intermediates. Coke produced at higher temperatures was more condensed, more ordered, and less reactive, whereas higher syngas pressure resulted in a more disordered and functionalized carbon structure with higher oxidation reactivity. An exploratory composite structure–reactivity descriptor showed a strong within-data set association with the air-oxidation index (R2 = 0.9791; Q2LOO = 0.9498); however, the relationship is based on only eight unique operating conditions and requires external validation before predictive generalization. Considering conversion, product distribution, pressure severity, and coke reactivity, 450 °C and 1 MPa were retained as a reasonable bench-scale reference among the tested conditions, rather than as a temperature–pressure optimum.

ACS Omega
China National Nuclear Corporation (CN), China University of Petroleum, Beijing (CN), Zhengzhou University of Light Industry (CN)
National Natural Science Foundation of China, Henan Provincial Science and Technology Research Project
Affordable and clean energy
Petroleum Processing and Analysis
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon