Surfactant Selection and Single-Factor Screening of In-Situ Polymerization Parameters for Melamine–Formaldehyde Microencapsulation of Jasmine Fragrance Oil for Detergent Applications

Fragrance is a commercially decisive ingredient of detergents, but its volatility limits the scent that survives storage, washing and drying. Melamine–formaldehyde (MF) microcapsules are widely used to address this problem, yet suitable processing conditions depend on the emulsifier and on the fragrance. Here, a commercial synthetic jasmine fragrance was encapsulated in MF shells by in situ polymerization using technical-grade reagents. Twelve candidate emulsifiers and additives were screened under a fixed, non-acidified protocol, and six process parameters were then varied one factor at a time. Capsule formation depended on the interplay between the emulsifier and acid-catalyzed polycondensation: Tween 20 (HLB 16.7) gave no capsules without acidification but formed closed-shell capsules once the pH was lowered with citric acid. The selected processing window was pH 4, 60 °C, 4000 rpm, an MF:fragrance mass ratio of 1:2, prepolymer synthesis at 60 °C and an encapsulation time of ≥3 h (5 h adopted). SEM image analysis showed spherical capsules with a number-mean diameter of 1.32 ± 0.23 µm (n = 143). The fragrance absorbance at 360 nm in the aqueous phase decreased from 1.92 to the baseline level after encapsulation, corresponding to an apparent encapsulation efficiency of at least 96.8%. In a qualitative ambient test, the capsules released fragrance spontaneously over about four days, whereas commercial fragrance beads did not, indicating that the shell must be strengthened before mechanically triggered release can be achieved.

Authors

Institutions

Publication Details

Journal
Processes
Published
2026-11-17
DOI
https://doi.org/10.3390/pr14223700
Primary Topic
Microencapsulation and Drying Processes
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Surfactant Selection and Single-Factor Screening of In-Situ Polymerization Parameters for Melamine–Formaldehyde Microencapsulation of Jasmine Fragrance Oil for Detergent Applications

Trần Quốc Toàn, Phuong Thao Lai Phuong, Đỗ Tiến Lâm, Hong Minh Pham Thi et al.
Processes
Microencapsulation and Drying Processes
article

Surfactant Selection and Single-Factor Screening of In-Situ Polymerization Parameters for Melamine–Formaldehyde Microencapsulation of Jasmine Fragrance Oil for Detergent Applications

Trần Quốc Toàn, Phuong Thao Lai Phuong, Đỗ Tiến Lâm, Hong Minh Pham Thi, Dinh Duc Nguyen, Hong Phuong Nguyen Thi, Quang-Minh Chau
article en

Abstract

Fragrance is a commercially decisive ingredient of detergents, but its volatility limits the scent that survives storage, washing and drying. Melamine–formaldehyde (MF) microcapsules are widely used to address this problem, yet suitable processing conditions depend on the emulsifier and on the fragrance. Here, a commercial synthetic jasmine fragrance was encapsulated in MF shells by in situ polymerization using technical-grade reagents. Twelve candidate emulsifiers and additives were screened under a fixed, non-acidified protocol, and six process parameters were then varied one factor at a time. Capsule formation depended on the interplay between the emulsifier and acid-catalyzed polycondensation: Tween 20 (HLB 16.7) gave no capsules without acidification but formed closed-shell capsules once the pH was lowered with citric acid. The selected processing window was pH 4, 60 °C, 4000 rpm, an MF:fragrance mass ratio of 1:2, prepolymer synthesis at 60 °C and an encapsulation time of ≥3 h (5 h adopted). SEM image analysis showed spherical capsules with a number-mean diameter of 1.32 ± 0.23 µm (n = 143). The fragrance absorbance at 360 nm in the aqueous phase decreased from 1.92 to the baseline level after encapsulation, corresponding to an apparent encapsulation efficiency of at least 96.8%. In a qualitative ambient test, the capsules released fragrance spontaneously over about four days, whereas commercial fragrance beads did not, indicating that the shell must be strengthened before mechanically triggered release can be achieved.

ProcessesVol. 14(22)
Institute of Mathematics (VN), Trường Đại học Khoa học và Công nghệ Hà Nội (VN), Viện Hóa học (VN), Viện Khoa học công nghệ Năng lượng và Môi trường (VN), Vietnam Academy of Science and Technology (VN), Hanoi University of Science and Technology (VN)
Microencapsulation and Drying Processes
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon