Effects of Composition-Tuned Ni–Ti Catalytic Coatings on Wear and Corrosion Resistance of Gas-Nitrided Q420 Steel

Q420 steel is widely used in steel bridge connection components; however, wear and corrosion during service can significantly compromise its service life. Gas nitriding can improve the mechanical properties of Q420 steel, but its conventional implementation is characterized by low nitriding efficiency. In this study, Ni–Ti coatings with Ni/(Ni + Ti) atomic ratios ranging from 54.1% to 82.4% were deposited on Q420 steel by dual-target magnetron sputtering to serve as catalytic layers, followed by gas nitriding at 500 °C for 6 h. The results demonstrate that Ni–Ti coatings significantly promote nitriding, while the nitrided layer thickness exhibits a non-monotonic dependence on Ni content. The sample containing 70.4 at.% Ni exhibited the maximum effective nitrided layer thickness of 8.87 μm, approximately 2.25 times that of the directly nitrided counterpart. The sample containing 54.1 at.% Ni achieved the highest surface hardness of 843.24 HV, representing increases of 24.9% and 319.9% relative to the directly nitrided and untreated Q420 steel, respectively. Meanwhile, the sample containing 70.4 at.% Ni exhibited a corrosion current density Icorr of 0.191 mA·cm−2, corresponding to reductions of 51.0% and 27.7% relative to the untreated and directly nitrided samples, respectively. EDS and XRD analyses of the nitrided samples revealed pronounced changes in the elemental distribution and phase composition of the surface layers, indicating that the Ni–Ti catalytic coating participated in and modified the microstructural evolution during nitriding. The observed performance improvements can be primarily attributed to the ability of the Ni–Ti surface layer to promote NH3 dissociation and facilitate the diffusion of reactive nitrogen species.

Authors

Institutions

Publication Details

Journal
Coatings
Published
2026-11-17
DOI
https://doi.org/10.3390/coatings16111370
Primary Topic
Surface Treatment and Coatings
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effects of Composition-Tuned Ni–Ti Catalytic Coatings on Wear and Corrosion Resistance of Gas-Nitrided Q420 Steel

Hongyong Shao, Xiaocui Lv, Junming Li, Mingtao Chen
2 links
Coatings
Surface Treatment and Coatings
article

Effects of Composition-Tuned Ni–Ti Catalytic Coatings on Wear and Corrosion Resistance of Gas-Nitrided Q420 Steel

Hongyong Shao, Xiaocui Lv, Junming Li, Mingtao Chen
article en

Abstract

Q420 steel is widely used in steel bridge connection components; however, wear and corrosion during service can significantly compromise its service life. Gas nitriding can improve the mechanical properties of Q420 steel, but its conventional implementation is characterized by low nitriding efficiency. In this study, Ni–Ti coatings with Ni/(Ni + Ti) atomic ratios ranging from 54.1% to 82.4% were deposited on Q420 steel by dual-target magnetron sputtering to serve as catalytic layers, followed by gas nitriding at 500 °C for 6 h. The results demonstrate that Ni–Ti coatings significantly promote nitriding, while the nitrided layer thickness exhibits a non-monotonic dependence on Ni content. The sample containing 70.4 at.% Ni exhibited the maximum effective nitrided layer thickness of 8.87 μm, approximately 2.25 times that of the directly nitrided counterpart. The sample containing 54.1 at.% Ni achieved the highest surface hardness of 843.24 HV, representing increases of 24.9% and 319.9% relative to the directly nitrided and untreated Q420 steel, respectively. Meanwhile, the sample containing 70.4 at.% Ni exhibited a corrosion current density Icorr of 0.191 mA·cm−2, corresponding to reductions of 51.0% and 27.7% relative to the untreated and directly nitrided samples, respectively. EDS and XRD analyses of the nitrided samples revealed pronounced changes in the elemental distribution and phase composition of the surface layers, indicating that the Ni–Ti catalytic coating participated in and modified the microstructural evolution during nitriding. The observed performance improvements can be primarily attributed to the ability of the Ni–Ti surface layer to promote NH3 dissociation and facilitate the diffusion of reactive nitrogen species.

CoatingsVol. 16(11)
Guangxi University of Science and Technology (CN)
National Natural Science Foundation of China, Guangxi University of Science and Technology
Surface Treatment and Coatings
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon