Plastic Waste-to-Filament Technologies for Fused Deposition Modeling: Variability Propagation, Processing Strategies, and Part Performance
Recycling plastic waste into filaments for fused deposition modeling (FDM) is a promising way to combine polymer recycling and additive manufacturing. However, the performance of recycled feedstocks is strongly influenced by variability introduced throughout the processing chain. This review critically evaluates the conversion of plastic waste to filaments compatible with FDM based on an integrated waste-to-filament-to-part framework that links waste characteristics and pretreatment conditions, thermomechanical reprocessing, filament fabrication, FDM processing conditions, microstructure, and final part performance. Particular attention is given to polymer degradation and recycling history, filament dimensional consistency and rheological behavior, printability, interlayer adhesion, and the combined effects of processing parameters on mechanical performance. Current formulation strategies are comparatively analyzed, including single recycled polymers, recycled/virgin polymer blends, and mixed recycled polymer blends. Current evidence suggests that mechanical performance cannot be predicted based on polymer type or recycled content alone. Rather, coupled relationships among composition, processing, and microstructure indicate that incorporating virgin polymer does not necessarily yield proportional property recovery. The review further highlights major barriers to reproducibility, including poor reporting of waste origin and reprocessing history, feedstock variability, limited comparability of studies, and lack of standardized processing and characterization protocols. Future advances will depend on processing windows specific to each feedstock, systematic assessment of successive recycling loops, controlled blend design, and standardized reporting across the entire waste-to-filament-to-part chain. These strategies are essential for advancing recycled polymer FDM from a waste valorization approach toward a reliable manufacturing route for functional components.
Authors
- Jorge Cein Villanueva Guzmán (ORCID: https://orcid.org/0000-0003-1307-0801)
- José Navarro-Antonio (ORCID: https://orcid.org/0000-0001-6873-9328)
- Heriberto Cruz‐Martínez (ORCID: https://orcid.org/0000-0001-8967-1481)
- Pastor Teodoro Matadamas Ortiz (ORCID: https://orcid.org/0000-0002-1598-4212)
- Alejandro Gómez‐Sánchez (ORCID: https://orcid.org/0000-0001-9047-4805)
- Brenda García‐Hilerio
Institutions
- Instituto Tecnológico de Oaxaca (MX)
- Villahermosa Institute of Technology (MX)
- Tecnológico Nacional de México (MX)
- Instituto Politécnico Nacional (MX)
Publication Details
- Journal
- Journal of Composites Science
- Published
- 2026-11-16
- DOI
- https://doi.org/10.3390/jcs10110615
- Primary Topic
- Additive Manufacturing and 3D Printing Technologies
- Type
- article
- Field-Weighted Citation Impact
- 0.00