Eggshell-supported iron oxide composite for As(III) removal via response surface optimization

Arsenic contamination of water poses a serious environmental and public health challenge, particularly where affordable treatment technologies are limited. In this study, an eggshell-supported iron oxide composite was synthesized by precipitation-calcination and evaluated for As(III) removal from aqueous solution. The composite was characterized by X-ray diffraction, scanning electron microscopy, Fourier-transform infrared spectroscopy, Brunauer–Emmett–Teller surface-area analysis, and particle-size analysis. The specific surface area was 9.79 m 2 g −1 , and particle-size analysis indicated a nanoscale size under the specified measurement conditions. Adsorption conditions were optimized using response surface methodology with a Box–Behnken design, considering pH (4–9), adsorbent dosage (0.2–1.5 g L −1 ), initial As(III) concentration (5–35 mg L −1 ), and contact time (30–120 min). The optimum conditions were pH 7.10, adsorbent dosage 1.2879 g L −1 , initial As(III) concentration 16.1834 mg L −1 , and contact time 89.3404 min, yielding a predicted removal efficiency of 95.7528%. Experimental validation gave 95.0 $$\pm $$ 0.17% removal. After correcting the adsorbent mass used in adsorption-capacity calculations, the pseudo-second-order model provided a better fit than the pseudo-first-order model (R 2 $$=$$ 0.997 and 0.696, respectively), although kinetic fitting alone does not establish chemisorption. Equilibrium data were better described by the Langmuir model than by the Freundlich model (R 2 $$=$$ 0.998 and approximately 0.74, respectively). The findings demonstrate the potential of eggshell-supported iron oxide as a waste-derived adsorbent for As(III) removal and eggshell waste valorization. Further studies using environmentally relevant arsenic concentrations, competing ions, and regeneration cycles are required to assess practical water-treatment applicability.

Authors

Institutions

Publication Details

Journal
Scientific Reports
Published
2026-11-18
DOI
https://doi.org/10.1038/s41598-026-80770-0
Primary Topic
Arsenic contamination and mitigation
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Eggshell-supported iron oxide composite for As(III) removal via response surface optimization

Tariku Tadesse Gameda, B. W. Duke, Natan Dereje Mekonin, Milkeessa Abdisa Feyisa et al.
1 links
Scientific Reports
Arsenic contamination and mitigation
article

Eggshell-supported iron oxide composite for As(III) removal via response surface optimization

Tariku Tadesse Gameda, B. W. Duke, Natan Dereje Mekonin, Milkeessa Abdisa Feyisa, Fekadu Fufa Feyessa, Tariku Olika Desisa
article en

Abstract

Arsenic contamination of water poses a serious environmental and public health challenge, particularly where affordable treatment technologies are limited. In this study, an eggshell-supported iron oxide composite was synthesized by precipitation-calcination and evaluated for As(III) removal from aqueous solution. The composite was characterized by X-ray diffraction, scanning electron microscopy, Fourier-transform infrared spectroscopy, Brunauer–Emmett–Teller surface-area analysis, and particle-size analysis. The specific surface area was 9.79 m 2 g −1 , and particle-size analysis indicated a nanoscale size under the specified measurement conditions. Adsorption conditions were optimized using response surface methodology with a Box–Behnken design, considering pH (4–9), adsorbent dosage (0.2–1.5 g L −1 ), initial As(III) concentration (5–35 mg L −1 ), and contact time (30–120 min). The optimum conditions were pH 7.10, adsorbent dosage 1.2879 g L −1 , initial As(III) concentration 16.1834 mg L −1 , and contact time 89.3404 min, yielding a predicted removal efficiency of 95.7528%. Experimental validation gave 95.0 $$\pm $$ 0.17% removal. After correcting the adsorbent mass used in adsorption-capacity calculations, the pseudo-second-order model provided a better fit than the pseudo-first-order model (R 2 $$=$$ 0.997 and 0.696, respectively), although kinetic fitting alone does not establish chemisorption. Equilibrium data were better described by the Langmuir model than by the Freundlich model (R 2 $$=$$ 0.998 and approximately 0.74, respectively). The findings demonstrate the potential of eggshell-supported iron oxide as a waste-derived adsorbent for As(III) removal and eggshell waste valorization. Further studies using environmentally relevant arsenic concentrations, competing ions, and regeneration cycles are required to assess practical water-treatment applicability.

Scientific Reports
Jimma University (ET), Bule Hora University (ET)
Jimma University
Clean water and sanitation, Responsible consumption and production
Arsenic contamination and mitigation
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon