Design and Performance Analysis of an Electromagnetic Load-Reduction Thrust Bearing System for Large Hydro-Generators
As hydro-generator units trend toward higher capacity and rotational speed, conventional thrust bearings face increasing challenges in terms of friction loss, pad temperature, and oil-film reliability. This paper presents an electromagnetic load-reduction thrust bearing system that employs a stationary iron core fixed to the concrete foundation and an active iron core coupled to the generator rotor, generating an electromagnetic axial force to offload up to approximately 80% of the total thrust load. Two distinct bearing design philosophies under load-reduction conditions were comparatively evaluated for three representative unit types: a high-speed pumped-storage unit (Yangjiang, 500 r/min), a giant hydro-generator unit (Baihetan, 107.1 r/min), and a conventional 300–500 MW Francis unit (Huangdeng, 111.1 r/min). Results show that retaining the original bearing geometry under load reduction provides significant benefits in pad temperature reduction and oil-film thickness increase but yields limited friction-loss reduction (85–92% of the full-load loss at 60% load). Conversely, redesigning the bearing pad area proportionally to the load reduction achieves a friction loss of 58–67.5% of the full-load value at 60% load, while maintaining acceptable operating parameters. The findings provide design guidance for applying electromagnetic load-reduction technology to different hydro-generator unit categories. The magnetic-circuit analysis served for preliminary structural sizing, and the final load capacity was verified by finite-element simulation.
Authors
- Xiyang Zou
- Jian Wu (ORCID: https://orcid.org/0000-0002-3356-3243)
- Lijie Hu
- Chao Guo
- Peihao Jiang
- Chengyou Nan
Institutions
- Harbin Institute of Technology (CN)
- Harbin Electric Corporation (China) (CN)
Publication Details
- Journal
- Energies
- Published
- 2026-11-17
- DOI
- https://doi.org/10.3390/en19225550
- Primary Topic
- Tribology and Lubrication Engineering
- Type
- article
- Field-Weighted Citation Impact
- 0.00