Production of an Artificial Aggregate Containing Iron Ore Tailings: Thermo-Mineralogical Assessment and Repeated-Load Response of a Soil–Aggregate Mixture
The beneficial use of iron ore tailings as a constituent of artificial aggregates may contribute to reducing both waste disposal and the consumption of natural aggregates in pavement construction. This study evaluated an integrated approach for the development of an artificial aggregate from soil and iron ore tailings, using thermo-mineralogical characterization to guide the selection of the production condition. Soil–tailing mixtures containing 30% and 50% tailings were evaluated by TGA/DTG prior to thermal treatment and, after calcination at 700, 800, and 900 °C, by X-ray diffraction (XRD). Based on the thermo-mineralogical behavior, the amount of tailings incorporated, and the severity of the processing condition, the composition containing 50% soil and 50% tailings, calcined at 800 °C, was selected for aggregate production. The aggregate produced under this condition was subsequently incorporated into the soil at a fixed content of 30% and evaluated through multistage repeated-load triaxial testing. In this preliminary mechanical verification, based on one specimen per material condition, the soil–aggregate mixture exhibited accumulated permanent deformation below approximately 2 mm, whereas the natural soil exceeded 13 mm, corresponding to a descriptive reduction of approximately 85% at the common comparison point. The qualitative analysis of permanent deformation in light of the shakedown concept also indicated a greater tendency toward stabilization of the soil–aggregate mixture under progressively increasing stress levels. The results support the use of thermo-mineralogical screening to guide the selection of the production condition prior to mechanical verification of the soil–aggregate mixture and indicate the potential of this strategy for developing artificial aggregates containing mining tailings for mixtures intended for unbound structural pavement layers.
Authors
- Antônio Carlos Rodrigues Guimarães (ORCID: https://orcid.org/0000-0001-9244-7034)
- Sérgio Neves Monteiro (ORCID: https://orcid.org/0000-0003-1208-1234)
- Belayne Zanini Marchi (ORCID: https://orcid.org/0000-0003-4497-6008)
- Lisley Madeira Coelho (ORCID: https://orcid.org/0000-0002-4022-1241)
- Clarissa de Paula Dias (ORCID: https://orcid.org/0009-0005-6617-6441)
Institutions
- Military Institute of Engineering (BR)
Publication Details
- Journal
- Recycling
- Published
- 2026-11-17
- DOI
- https://doi.org/10.3390/recycling11110208
- Primary Topic
- Materials Engineering and Processing
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Coordenação de Aperfeiçoamento de Pessoal de Nível Superior