Particle-Scale Triaxial Compression Simulations of Clay Using Coarse-Grained Molecular Dynamics

Abstract Recent advances in particle-scale simulations have enabled detailed investigation of clay behavior beyond what can be obtained from conventional laboratory tests. However, most previous particle-scale studies of clay have focused on one-dimensional (1D) or isotropic compression, and comparatively few studies have examined shear response. This paper presents coarse-grained molecular dynamics (CGMD) simulations of triaxial compression on normally consolidated kaolinite. Two virtual samples were generated under different pore fluid pH conditions to produce contrasting initial microfabrics: a flocculated sample at pH = 4 and a dispersed sample at pH = 8 . Triaxial compression simulations were conducted under constant confining pressures of 300, 400, and 500 kPa. The results showed that the CGMD simulations qualitatively reproduce key features of clay behavior observed in laboratory tests, including stress-dependent stiffness and shear strength, and convergence toward critical state response at large axial strains. The pH = 4 sample exhibited strain-hardening and contractive behavior, whereas the pH = 8 sample exhibited peak strength and dilative behavior, often associated with overconsolidated clay behavior despite being normally consolidated. These contrasting responses were explained micromechanically in terms of different initial microfabrics and their subsequent evolution during shear. Parametric studies further showed that increasing the coefficient of interparticle friction ( μ ) increased the macroscopic critical state friction angle ( ϕ c r ′ ), and that, for the kaolinite and modeling framework considered here, values on the order of μ ≈ 1.0 were required to approach experimentally reported friction angles. Furthermore, a linear relationship was observed between sin ϕ c r ′ obtained from the triaxial simulations and the lateral earth pressure coefficient at rest ( K 0 ) obtained from one-dimensional compression, consistent with previously reported experimental trends. These findings demonstrate the value of particle-scale simulations for linking pH-dependent interparticle interactions, microfabric evolution, and macroscopic clay behavior.

Authors

Institutions

Publication Details

Journal
Journal of Geotechnical and Geoenvironmental Engineering
Published
2026-11-17
DOI
https://doi.org/10.1061/jggefk.gteng-15422
Primary Topic
Geotechnical Engineering and Soil Mechanics
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Particle-Scale Triaxial Compression Simulations of Clay Using Coarse-Grained Molecular Dynamics

Catherine O’Sullivan, Stefano Angioletti‐Uberti, Paul Tangney, Yohei Nakamichi
1 links
Journal of Geotechnical and Geoenvironmental Engineering
Geotechnical Engineering and Soil Mechanics
article

Particle-Scale Triaxial Compression Simulations of Clay Using Coarse-Grained Molecular Dynamics

Catherine O’Sullivan, Stefano Angioletti‐Uberti, Paul Tangney, Yohei Nakamichi
article en

Abstract

Abstract Recent advances in particle-scale simulations have enabled detailed investigation of clay behavior beyond what can be obtained from conventional laboratory tests. However, most previous particle-scale studies of clay have focused on one-dimensional (1D) or isotropic compression, and comparatively few studies have examined shear response. This paper presents coarse-grained molecular dynamics (CGMD) simulations of triaxial compression on normally consolidated kaolinite. Two virtual samples were generated under different pore fluid pH conditions to produce contrasting initial microfabrics: a flocculated sample at pH = 4 and a dispersed sample at pH = 8 . Triaxial compression simulations were conducted under constant confining pressures of 300, 400, and 500 kPa. The results showed that the CGMD simulations qualitatively reproduce key features of clay behavior observed in laboratory tests, including stress-dependent stiffness and shear strength, and convergence toward critical state response at large axial strains. The pH = 4 sample exhibited strain-hardening and contractive behavior, whereas the pH = 8 sample exhibited peak strength and dilative behavior, often associated with overconsolidated clay behavior despite being normally consolidated. These contrasting responses were explained micromechanically in terms of different initial microfabrics and their subsequent evolution during shear. Parametric studies further showed that increasing the coefficient of interparticle friction ( μ ) increased the macroscopic critical state friction angle ( ϕ c r ′ ), and that, for the kaolinite and modeling framework considered here, values on the order of μ ≈ 1.0 were required to approach experimentally reported friction angles. Furthermore, a linear relationship was observed between sin ϕ c r ′ obtained from the triaxial simulations and the lateral earth pressure coefficient at rest ( K 0 ) obtained from one-dimensional compression, consistent with previously reported experimental trends. These findings demonstrate the value of particle-scale simulations for linking pH-dependent interparticle interactions, microfabric evolution, and macroscopic clay behavior.

Journal of Geotechnical and Geoenvironmental EngineeringVol. 153(2)
Japan Research Institute (JP), Imperial College London (GB)
Imperial College London, University College London, Engineering and Physical Sciences Research Council
Geotechnical Engineering and Soil Mechanics
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon