Laser-Based Indoor Simulator for Verification of MWIR Camera Target-Tracking Algorithms

This study developed a laser-based indoor simulator for verifying target-tracking algorithms of mid-wave infrared (MWIR) cameras. Verification of MWIR camera tracking algorithms typically relies on tracking a thermal target outdoors. However, variations in spatiotemporal and environmental conditions during outdoor tests make it difficult to ensure repeatability under identical test conditions. To address this limitation, the proposed simulator replaced the outdoor thermal target with a 4.6 μm laser source that served as a simulated MWIR target. Integrating a heat sink and cooling fan reduced the laser ambient temperature from more than 77.3 °C to within 29–33 °C and enabled continuous operation for over one hour. The collimating lens was configured to produce a simulated target measuring 9.17 mm horizontally and 7.56 mm vertically on a target plate placed 2000 mm from the simulator. The addition of three Germanium lenses reduced the laser power to 3.2 mW, which satisfies the Class 1 accessible emission limit (AEL). By controlling the galvanometer waveforms, target velocities of 43.17 mm/s along the X-axis and 41.94 mm/s along the Y-axis were implemented. These results indicate that the proposed simulator can provide a repeatable and safer indoor platform for MWIR camera tracking algorithm verification.

Authors

Institutions

Publication Details

Journal
Sensors
Published
2026-11-16
DOI
https://doi.org/10.3390/s26227219
Primary Topic
Advanced Measurement and Detection Methods
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Laser-Based Indoor Simulator for Verification of MWIR Camera Target-Tracking Algorithms

박건우, 김치수, Mansik Jeon, 김덕연 et al.
Sensors
Advanced Measurement and Detection Methods
article

Laser-Based Indoor Simulator for Verification of MWIR Camera Target-Tracking Algorithms

박건우, 김치수, Mansik Jeon, 김덕연, Jeehyun Kim, Seungpyo Hong, Kiwoong Kim
article en

Abstract

This study developed a laser-based indoor simulator for verifying target-tracking algorithms of mid-wave infrared (MWIR) cameras. Verification of MWIR camera tracking algorithms typically relies on tracking a thermal target outdoors. However, variations in spatiotemporal and environmental conditions during outdoor tests make it difficult to ensure repeatability under identical test conditions. To address this limitation, the proposed simulator replaced the outdoor thermal target with a 4.6 μm laser source that served as a simulated MWIR target. Integrating a heat sink and cooling fan reduced the laser ambient temperature from more than 77.3 °C to within 29–33 °C and enabled continuous operation for over one hour. The collimating lens was configured to produce a simulated target measuring 9.17 mm horizontally and 7.56 mm vertically on a target plate placed 2000 mm from the simulator. The addition of three Germanium lenses reduced the laser power to 3.2 mW, which satisfies the Class 1 accessible emission limit (AEL). By controlling the galvanometer waveforms, target velocities of 43.17 mm/s along the X-axis and 41.94 mm/s along the Y-axis were implemented. These results indicate that the proposed simulator can provide a repeatable and safer indoor platform for MWIR camera tracking algorithm verification.

SensorsVol. 26(22)
Kyungpook National University (KR)
Advanced Measurement and Detection Methods
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon