Comparative Structural and Thermal Finite Element Analysis of a Single-Cylinder IC Engine Piston Using Aluminium Alloy, SS316 and AlSi10Mg

The piston is one of the most heavily loaded components of an internal combustion (IC) engine, since it must withstand cyclic gas pressure, steep thermal gradients and high reciprocating speeds. This paper presents the design and finite element analysis (FEA) of a piston for a single-cylinder, four-stroke engine with a 50 mm bore and 49.5 mm stroke. A three-dimensional model containing a concave crown, three ring grooves, gudgeon-pin bosses, internal ribs and fillets was developed in Autodesk Fusion 360 and analysed in ANSYS Workbench. Static structural analysis under a peak gas pressure of 5 MPa and steady-state thermal analysis were carried out for three candidate materials: an aluminium alloy, AISI 316 stainless steel (SS316) and the additively manufacturable alloy AlSi10Mg. The equivalent stress was almost material independent (169.7–184.8 MPa), whereas SS316 reduced the maximum deformation from 0.224 mm (aluminium) to 0.085 mm and lowered the peak total heat flux from 254.6 to 39.2 W/mm2. A hand calculation based on strength of materials reproduced the FEA stress within 0.5% and the same material ranking, which validates the load path and boundary conditions of the model. The results show that SS316 gives the greatest stiffness and the lowest heat rejection through the crown, while the aluminium alloys retain the advantage of low mass; the trade-offs are discussed to guide material selection.

Authors

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-17
DOI
https://doi.org/10.5281/zenodo.24302157
Primary Topic
Engineering Applied Research
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Comparative Structural and Thermal Finite Element Analysis of a Single-Cylinder IC Engine Piston Using Aluminium Alloy, SS316 and AlSi10Mg

T.Y badgujar, Arpita Sunil Kale
2 links
Zenodo (CERN European Organization for Nuclear Research)
Engineering Applied Research
article

Comparative Structural and Thermal Finite Element Analysis of a Single-Cylinder IC Engine Piston Using Aluminium Alloy, SS316 and AlSi10Mg

T.Y badgujar, Arpita Sunil Kale
article en

Abstract

The piston is one of the most heavily loaded components of an internal combustion (IC) engine, since it must withstand cyclic gas pressure, steep thermal gradients and high reciprocating speeds. This paper presents the design and finite element analysis (FEA) of a piston for a single-cylinder, four-stroke engine with a 50 mm bore and 49.5 mm stroke. A three-dimensional model containing a concave crown, three ring grooves, gudgeon-pin bosses, internal ribs and fillets was developed in Autodesk Fusion 360 and analysed in ANSYS Workbench. Static structural analysis under a peak gas pressure of 5 MPa and steady-state thermal analysis were carried out for three candidate materials: an aluminium alloy, AISI 316 stainless steel (SS316) and the additively manufacturable alloy AlSi10Mg. The equivalent stress was almost material independent (169.7–184.8 MPa), whereas SS316 reduced the maximum deformation from 0.224 mm (aluminium) to 0.085 mm and lowered the peak total heat flux from 254.6 to 39.2 W/mm2. A hand calculation based on strength of materials reproduced the FEA stress within 0.5% and the same material ranking, which validates the load path and boundary conditions of the model. The results show that SS316 gives the greatest stiffness and the lowest heat rejection through the crown, while the aluminium alloys retain the advantage of low mass; the trade-offs are discussed to guide material selection.

Zenodo (CERN European Organization for Nuclear Research)
Engineering Applied Research
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon