Measurement-supported CFD Modeling of Vapor Transport in an Indoor Swimming Pool

Indoor swimming pools require reliable control of air temperature, relative humidity, and outdoor-air supply to ensure thermal comfort, limit condensation and corrosion, and reduce the energy demand of ventilation and dehumidification systems. However, airflow and vapor distributions depend strongly on facility geometry, water surfaces, air-supply arrangement, and operating conditions; therefore, a single humidity measurement may not represent conditions throughout the hall. This study presents a measurement-supported workflow combining local field observations, operational data from four air-handling units, a Dalton-type pool evaporation model, and full-room computational fluid dynamics to analyze vapor transport and identify candidate humidity-sensor locations in a large indoor pool hall with approximately 2024 m² of water surface. At the analyzed operating condition, the evaporation rate predicted by the Dalton-type model agreed with the value independently determined from the air-handling-unit vapor balance within the measurement uncertainty. A three-dimensional ANSYS CFX model was developed in which humid air was treated as a two-component ideal-gas mixture, buoyancy was included, and turbulence was represented using the SST k–ω model. Two air-supply distributions were compared at an unchanged total supply flow rate. Relative to the 1:1 split, the 3:1 spectator-to-pool-side split weakened pool-side mixing, modified ceiling-level low-velocity regions, and increased humidity accumulation near the teaching-pool corner. The integrated workflow linked the building-system vapor balance to pool-specific CFD source terms and identified internal columns at approximately 2.5 m height as promising sensor locations because they avoid direct supply jets while remaining exposed to representative pool-space conditions.

Authors

Institutions

Publication Details

Journal
Periodica Polytechnica Civil Engineering
Published
2026-11-17
DOI
https://doi.org/10.3311/ppci.45830
Primary Topic
Building Energy and Comfort Optimization
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Measurement-supported CFD Modeling of Vapor Transport in an Indoor Swimming Pool

Péter Nagy-György
Periodica Polytechnica Civil Engineering
Building Energy and Comfort Optimization
article

Measurement-supported CFD Modeling of Vapor Transport in an Indoor Swimming Pool

Péter Nagy-György
article en

Abstract

Indoor swimming pools require reliable control of air temperature, relative humidity, and outdoor-air supply to ensure thermal comfort, limit condensation and corrosion, and reduce the energy demand of ventilation and dehumidification systems. However, airflow and vapor distributions depend strongly on facility geometry, water surfaces, air-supply arrangement, and operating conditions; therefore, a single humidity measurement may not represent conditions throughout the hall. This study presents a measurement-supported workflow combining local field observations, operational data from four air-handling units, a Dalton-type pool evaporation model, and full-room computational fluid dynamics to analyze vapor transport and identify candidate humidity-sensor locations in a large indoor pool hall with approximately 2024 m² of water surface. At the analyzed operating condition, the evaporation rate predicted by the Dalton-type model agreed with the value independently determined from the air-handling-unit vapor balance within the measurement uncertainty. A three-dimensional ANSYS CFX model was developed in which humid air was treated as a two-component ideal-gas mixture, buoyancy was included, and turbulence was represented using the SST k–ω model. Two air-supply distributions were compared at an unchanged total supply flow rate. Relative to the 1:1 split, the 3:1 spectator-to-pool-side split weakened pool-side mixing, modified ceiling-level low-velocity regions, and increased humidity accumulation near the teaching-pool corner. The integrated workflow linked the building-system vapor balance to pool-specific CFD source terms and identified internal columns at approximately 2.5 m height as promising sensor locations because they avoid direct supply jets while remaining exposed to representative pool-space conditions.

Periodica Polytechnica Civil Engineering
Budapest University of Technology and Economics (HU)
Building Energy and Comfort Optimization
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon