Coupled Dynamic Modeling of a Brackish-Water Desalination System Driven by Heavy-Vehicle Traffic Through a Unilateral Speed-Bump Harvester

Traffic energy harvesting has been studied almost exclusively for electricity, and no transient model couples the full mechanical-to-hydraulic chain of a speed bump that pressurizes brackish water for reverse osmosis while treating the wheel–bump contact as a unilateral constraint. This work formulates such a model: half-car dynamics with pitch, a unilaterally constrained speed bump, four single-acting pistons with check-valve rectification, a hydropneumatic accumulator with adiabatic charge and isothermal discharge, and a solution-diffusion RO element with emergent recovery. The contact law transmits to the platform only the compressive tire load, the static axle load minus the dynamic extension, which is also the lift-off threshold; the tire spring of the vehicle model remains bilateral and the effect of that asymmetry is bounded. An event-driven Runge–Kutta scheme converges at first order; a nine-step study of the reference event shows every reported quantity within 0.7% of its limit; the model is verified but not experimentally validated. For a 10,500 kg vehicle at 30 km/h, the tires deliver 8.98 kJ and the accumulator stores 8.03 kJ (89.3%); the end stop takes 1.5%. The platform is driven by the static axle load and the lighter axle bounds the design. The event pumps 3.58 L and yields 1.21 L of permeate at 1.81 kWh/m3 and 788 mg/L from a 16.7 g/L feed. Across six commercial modules selectivity, not water permeability, sets product quality; a 1 km/h sweep without clipping shows weak speed sensitivity and a re-impact band at 14 to 20 km/h. The objective is to demonstrate by numerical modeling that the chain works and where it loses energy. At about one liter of non-potable water per vehicle the production is limited; competitiveness with conventional desalination has not been established, and the model includes no techno-economic assessment.

Authors

Institutions

Publication Details

Journal
Modelling—International Open Access Journal of Modelling in Engineering Science
Published
2026-11-17
DOI
https://doi.org/10.3390/modelling7060257
Primary Topic
Innovative Energy Harvesting Technologies
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Coupled Dynamic Modeling of a Brackish-Water Desalination System Driven by Heavy-Vehicle Traffic Through a Unilateral Speed-Bump Harvester

Fausto Alfredo Canales, Javier Carpintero, Carlos Robles-Algarín
2 links
Modelling—International Open Access Journal of Modelling in Engineering Science
Innovative Energy Harvesting Technologies
article

Coupled Dynamic Modeling of a Brackish-Water Desalination System Driven by Heavy-Vehicle Traffic Through a Unilateral Speed-Bump Harvester

Fausto Alfredo Canales, Javier Carpintero, Carlos Robles-Algarín
article en

Abstract

Traffic energy harvesting has been studied almost exclusively for electricity, and no transient model couples the full mechanical-to-hydraulic chain of a speed bump that pressurizes brackish water for reverse osmosis while treating the wheel–bump contact as a unilateral constraint. This work formulates such a model: half-car dynamics with pitch, a unilaterally constrained speed bump, four single-acting pistons with check-valve rectification, a hydropneumatic accumulator with adiabatic charge and isothermal discharge, and a solution-diffusion RO element with emergent recovery. The contact law transmits to the platform only the compressive tire load, the static axle load minus the dynamic extension, which is also the lift-off threshold; the tire spring of the vehicle model remains bilateral and the effect of that asymmetry is bounded. An event-driven Runge–Kutta scheme converges at first order; a nine-step study of the reference event shows every reported quantity within 0.7% of its limit; the model is verified but not experimentally validated. For a 10,500 kg vehicle at 30 km/h, the tires deliver 8.98 kJ and the accumulator stores 8.03 kJ (89.3%); the end stop takes 1.5%. The platform is driven by the static axle load and the lighter axle bounds the design. The event pumps 3.58 L and yields 1.21 L of permeate at 1.81 kWh/m3 and 788 mg/L from a 16.7 g/L feed. Across six commercial modules selectivity, not water permeability, sets product quality; a 1 km/h sweep without clipping shows weak speed sensitivity and a re-impact band at 14 to 20 km/h. The objective is to demonstrate by numerical modeling that the chain works and where it loses energy. At about one liter of non-potable water per vehicle the production is limited; competitiveness with conventional desalination has not been established, and the model includes no techno-economic assessment.

Modelling—International Open Access Journal of Modelling in Engineering ScienceVol. 7(6)
Universidad del Magdalena (CO), Military University Nueva Granada (CO), University of the Coast (CO)
Industry, innovation and infrastructure, Affordable and clean energy, Clean water and sanitation, Sustainable cities and communities
Innovative Energy Harvesting Technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon