Temperature Field Evolution of Coal Spontaneous Combustion in a Goaf: Experimental Characterization and Numerical Simulation

This study investigates the spatiotemporal evolution of the temperature field during coal spontaneous combustion in the goaf of the No. 40202 fully mechanized top-coal caving face at Gaojialiang Coal Mine. Simultaneous TG-DSC analysis and temperature-programmed oxidation experiments were used to determine the characteristic temperatures, oxygen consumption rate, CO/CO2 generation rates and heat release intensity. These measurements supplied the source terms for a two-dimensional transient model coupling seepage, heat transfer and oxygen transport. The critical, dry-cracking, ignition and exothermic peak temperatures were 70 °C, 110 °C, 285 °C and 406.7 °C, respectively. The measured rates and heat release intensity followed piecewise Arrhenius relationships, with apparent activation energies increasing across successive temperature intervals. The heat release intensity was 78.04 W/m3 at 30 °C. The limiting oxygen concentration for sustained spontaneous combustion was 7–9%, and the limiting residual coal thickness was 0.60–0.85 m. Along the strike, the temperature increased from the working face to a maximum within the oxidation zone and then decreased towards the deep goaf. At a residual coal thickness of 0.8 m, the maximum temperature reached the critical temperature on day 46 (44–56), the dry-cracking temperature on day 62 (60–77) and the ignition temperature of 285 °C on day 71 (69–88). Subsequent oxygen depletion caused the high-temperature zone to migrate towards the working face. Residual coal thickness was the dominant factor: ignition occurred after 25.2 d at 1.6 m, whereas the temperature remained below the ignition threshold throughout 150 d at 0.5 m. These results support temperature monitoring, the timing of early warnings and the prevention and control of spontaneous combustion in the goaf.

Authors

Institutions

Publication Details

Journal
Energies
Published
2026-11-16
DOI
https://doi.org/10.3390/en19225520
Primary Topic
Coal Properties and Utilization
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Temperature Field Evolution of Coal Spontaneous Combustion in a Goaf: Experimental Characterization and Numerical Simulation

崔建庭, Yongli Liu, Bin Shen, Xinxu Li et al.
Energies
Coal Properties and Utilization
article

Temperature Field Evolution of Coal Spontaneous Combustion in a Goaf: Experimental Characterization and Numerical Simulation

崔建庭, Yongli Liu, Bin Shen, Xinxu Li, Guangzhu Li
article en

Abstract

This study investigates the spatiotemporal evolution of the temperature field during coal spontaneous combustion in the goaf of the No. 40202 fully mechanized top-coal caving face at Gaojialiang Coal Mine. Simultaneous TG-DSC analysis and temperature-programmed oxidation experiments were used to determine the characteristic temperatures, oxygen consumption rate, CO/CO2 generation rates and heat release intensity. These measurements supplied the source terms for a two-dimensional transient model coupling seepage, heat transfer and oxygen transport. The critical, dry-cracking, ignition and exothermic peak temperatures were 70 °C, 110 °C, 285 °C and 406.7 °C, respectively. The measured rates and heat release intensity followed piecewise Arrhenius relationships, with apparent activation energies increasing across successive temperature intervals. The heat release intensity was 78.04 W/m3 at 30 °C. The limiting oxygen concentration for sustained spontaneous combustion was 7–9%, and the limiting residual coal thickness was 0.60–0.85 m. Along the strike, the temperature increased from the working face to a maximum within the oxidation zone and then decreased towards the deep goaf. At a residual coal thickness of 0.8 m, the maximum temperature reached the critical temperature on day 46 (44–56), the dry-cracking temperature on day 62 (60–77) and the ignition temperature of 285 °C on day 71 (69–88). Subsequent oxygen depletion caused the high-temperature zone to migrate towards the working face. Residual coal thickness was the dominant factor: ignition occurred after 25.2 d at 1.6 m, whereas the temperature remained below the ignition threshold throughout 150 d at 0.5 m. These results support temperature monitoring, the timing of early warnings and the prevention and control of spontaneous combustion in the goaf.

EnergiesVol. 19(22)
Heilongjiang University of Science and Technology (CN)
Coal Properties and Utilization
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon