Sparse Height Sampling of Radar Wind-Profile Products: Criterion-Dependent Sufficiency and Temporal Stability
Wind-profile products are often reported on dense vertical grids, while neighbouring levels can share substantial covariance. This study quantifies the number and placement of reported heights needed to reconstruct a 15-level, 10 min mean horizontal wind-speed (WS_MEAN) radar product spanning 20–300 m under explicit root-mean-square error (RMSE) criteria. Historical profiles were used for proper orthogonal decomposition with QR-based height selection (POD–QR), and performance was evaluated in six forward-chaining windows against endpoint-matched layouts and a training-only exhaustive subset analysis. The all-six-fold POD–QR minimum was 14, 10, 5, and 3 retained levels at RMSE tolerances of 0.30, 0.40, 0.50 and 0.70 m s−1, respectively. At 0.50 m s−1, five levels achieved a mean RMSE of 0.395 m s−1 and ranked within the best 5.94% of endpoint-matched layouts in every fold. Seven levels reduced mean RMSE to 0.328 m s−1, with 91.3% of profiles below 0.50 m s−1. Early-fold layouts retained comparable performance in later periods, while profile curvature, level availability, and observation noise systematically affected recoverability. These findings support accuracy-constrained wind-profile product design and height-channel prioritisation, with potential applications in reduced-height sampling, missing-level reconstruction, data quality checks, and reduced transmission and storage requirements.
Authors
- Dongning Jia (ORCID: https://orcid.org/0000-0001-5805-4931)
- Yifang Li (ORCID: https://orcid.org/0009-0003-9930-648X)
- Yiyun Guo
Institutions
- Ocean University of China (CN)
Publication Details
- Journal
- Remote Sensing
- Published
- 2026-11-17
- DOI
- https://doi.org/10.3390/rs18223932
- Primary Topic
- Meteorological Phenomena and Simulations
- Type
- article
- Field-Weighted Citation Impact
- 0.00