High-Temperature Deformation Behavior and Hot Workability of a Ti2AlNb-Based Alloy
Ti2AlNb-based alloys are promising candidates for aeroengine hot-section components, but their narrow processing windows complicate hot forming. This study investigates the flow behaviors and hot workability of a forged Ti2AlNb-based alloy using isothermal compression tests at deformation temperature of 970–1060 °C and strain rates of 0.01–10 s−1. Four constitutive models are established to describe the flow behaviors, including strain-compensated Arrhenius, multiple linear regression, standard backpropagation (BP), and sparrow-search-optimized BP (SSA-BP) models. The SSA-BP model achieves the highest prediction accuracy, with correlation coefficients of 0.998 and 0.995 for the training and testing sets, respectively. The corresponding mean absolute relative errors are 1.95% and 3.31%, and the root mean square errors are 4.36 and 7.49 MPa. Processing maps constructed based on the Murty instability criterion identify a preferred hot processing window of 1030–1060 °C and 0.01–0.5 s−1 across the evaluated strains. Electron backscatter diffraction reveals a lower α2 phase fraction and a modest increase in the recrystallized grain fraction at higher temperatures. Higher strain rates suppress recrystallization and limit the growth of recrystallized grains. These findings provide alloy-specific guidance for selecting hot processing parameters.
Authors
- Mingjie Zhao (ORCID: https://orcid.org/0000-0002-4277-8844)
- Minghao Tang
- Wenpeng Shi
- Lihong Jiang
- Yuandong Zhang
- Weiping Chen
- Jiping Guo
Institutions
- Jingdezhen University (CN)
- State Key Laboratory of Materials Processing and Die & Mould Technology (CN)
- Huazhong University of Science and Technology (CN)
- Nanchang Hangkong University (CN)
Publication Details
- Journal
- Crystals
- Published
- 2026-11-16
- DOI
- https://doi.org/10.3390/cryst16110723
- Primary Topic
- Metallurgy and Material Forming
- Type
- article
- Field-Weighted Citation Impact
- 0.00