Passive Triple Strategy: Tracking, Fin Sinking, and Radiative Back Coating for Photovoltaic Performance Enhancement

ABSTRACT This study addresses the challenge of improving photovoltaic module performance in hot, arid climates where high solar irradiance, elevated ambient temperatures, and dust substantially reduce electrical and exergy efficiencies. Using Sohar, Oman, as a representative coastal desert site, the work investigates whether combining a simple multi‑position tracking strategy with passive cooling measures can provide a practical performance enhancement without resorting to complex active systems. Four identical PV modules were evaluated side by side. Module 1 was the fixed reference with no tracking or cooling. Module 2 carried the low‐power three‐position tracker only. Module 3 added aluminum fins to the tracked module, and Module 4 further added a TiO 2 ‑PDMS radiative coating on the rear surface. Each configuration was tested outdoors over typical clear days, recording ambient and module temperatures, solar irradiance, and electrical output, and then evaluating electrical, thermal, and exergy efficiencies. The electrical efficiency increment rate for working a full day was 15%, 45.9%, and 69.16% for modules 2, 3, and 4, compared to module 1. Adding fins to the tracking panel reduced its peak temperature by up to 6°C–8°C, and the combined fins and TiO 2 ‐PDMS coating achieved the highest performance, with midday module temperatures reduced by 7°C–10°C lower than the standalone module. For a full‐day operation, the increase rate in electrical exergy efficiency (EEE) compared to module 1 was 14.90%, 44.57%, and 69.43% for modules 2, 3, and 4, respectively. The results demonstrate the passive, low‐cost implementation of a hybrid configuration of three‐position tracking, aluminum fins, and a TiO 2 ‐PDMS rear coating for the first time in a coastal‐desert climate, with up to 69% gains in both electrical and exergy efficiency.

Authors

Institutions

Publication Details

Journal
Heat Transfer
Published
2026-11-17
DOI
https://doi.org/10.1002/htj.70422
Primary Topic
Solar Thermal and Photovoltaic Systems
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Passive Triple Strategy: Tracking, Fin Sinking, and Radiative Back Coating for Photovoltaic Performance Enhancement

Kamaruzzaman Sopian, Ali H.A. Al‐Waeli, Miqdam Tariq Chaichan, Hussein A. Kazem
4 links
Heat Transfer
Solar Thermal and Photovoltaic Systems
article

Passive Triple Strategy: Tracking, Fin Sinking, and Radiative Back Coating for Photovoltaic Performance Enhancement

Kamaruzzaman Sopian, Ali H.A. Al‐Waeli, Miqdam Tariq Chaichan, Hussein A. Kazem
article en

Abstract

ABSTRACT This study addresses the challenge of improving photovoltaic module performance in hot, arid climates where high solar irradiance, elevated ambient temperatures, and dust substantially reduce electrical and exergy efficiencies. Using Sohar, Oman, as a representative coastal desert site, the work investigates whether combining a simple multi‑position tracking strategy with passive cooling measures can provide a practical performance enhancement without resorting to complex active systems. Four identical PV modules were evaluated side by side. Module 1 was the fixed reference with no tracking or cooling. Module 2 carried the low‐power three‐position tracker only. Module 3 added aluminum fins to the tracked module, and Module 4 further added a TiO 2 ‑PDMS radiative coating on the rear surface. Each configuration was tested outdoors over typical clear days, recording ambient and module temperatures, solar irradiance, and electrical output, and then evaluating electrical, thermal, and exergy efficiencies. The electrical efficiency increment rate for working a full day was 15%, 45.9%, and 69.16% for modules 2, 3, and 4, compared to module 1. Adding fins to the tracking panel reduced its peak temperature by up to 6°C–8°C, and the combined fins and TiO 2 ‐PDMS coating achieved the highest performance, with midday module temperatures reduced by 7°C–10°C lower than the standalone module. For a full‐day operation, the increase rate in electrical exergy efficiency (EEE) compared to module 1 was 14.90%, 44.57%, and 69.43% for modules 2, 3, and 4, respectively. The results demonstrate the passive, low‐cost implementation of a hybrid configuration of three‐position tracking, aluminum fins, and a TiO 2 ‐PDMS rear coating for the first time in a coastal‐desert climate, with up to 69% gains in both electrical and exergy efficiency.

Heat Transfer
UNESCO (FR), American University of Iraq Sulaimani (IQ), University of Technology - Iraq (IQ), Universiti Teknologi Petronas (MY), Sohar University (OM)
Sohar University
Affordable and clean energy, Climate action, Industry, innovation and infrastructure
Solar Thermal and Photovoltaic Systems
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon