Tailoring hydrophobic PDMS – PVDF membranes via solvent–polymer compatibility and additives for membrane distillation desalination

Abstract Membrane wetting and limited operational stability remain major challenges in membrane distillation, and both are strongly influenced by solvent selection and phase‐inversion behaviour. In this study, the polymer–solvent compatibility of polyvinylidene fluoride (PVDF) and polydimethylsiloxane (PDMS) was evaluated using Hansen solubility parameter (HSP) distance analysis to guide the fabrication of solution‐blended PDMS–PVDF membranes. Four solvents—NMP, DMF, DMSO, and THF—were investigated. The HSP results indicated that NMP and DMF are compatible with PVDF, while THF exhibited stronger affinity for PDMS. Accordingly, PVDF was dissolved in NMP and DMF, and PDMS in THF. Additives, including PEG‐400, H 3 PO 4 , and toluene, were incorporated. NMP‐based membranes demonstrated higher hydrophobicity, with the PEG‐400‐modified membrane exhibiting a water contact angle of 104.3°, compared to 83.9° for the DMF‐based system. Membrane porosity ranged from 51.42% to 57.8%. AFM analysis revealed maximum surface roughness (Ra = 5.554 nm; Sq = 7.389 nm) for the PEG‐400‐modified membrane. SEM, XRD, and FTIR analyses confirmed favourable morphology and structural characteristics. During VMD desalination of a 20,000 mg L −1 NaCl solution, the permeate flux decreased from 18.5 to 17.6 kg m −2 h −1 over 180 h, while salt rejection remained approximately 99.77%. The selected membrane exhibited an LEP of approximately 294.5 kPa and a maximum thermal efficiency of 93.70%. The integration of HSP‐guided solvent screening, controlled additive comparison, solution blending, and long‐term VMD validation distinguishes this work from conventional solvent‐screening studies.

Authors

Institutions

Publication Details

Journal
The Canadian Journal of Chemical Engineering
Published
2026-11-17
DOI
https://doi.org/10.1002/cjce.70641
Primary Topic
Membrane Separation Technologies
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Tailoring hydrophobic PDMS – PVDF membranes via solvent–polymer compatibility and additives for membrane distillation desalination

Manish Vashishtha, Sarita Kalla, Sushant Upadhyaya, Manish Singh Rajput
4 links
The Canadian Journal of Chemical Engineering
Membrane Separation Technologies
article

Tailoring hydrophobic PDMS – PVDF membranes via solvent–polymer compatibility and additives for membrane distillation desalination

Manish Vashishtha, Sarita Kalla, Sushant Upadhyaya, Manish Singh Rajput
article en

Abstract

Abstract Membrane wetting and limited operational stability remain major challenges in membrane distillation, and both are strongly influenced by solvent selection and phase‐inversion behaviour. In this study, the polymer–solvent compatibility of polyvinylidene fluoride (PVDF) and polydimethylsiloxane (PDMS) was evaluated using Hansen solubility parameter (HSP) distance analysis to guide the fabrication of solution‐blended PDMS–PVDF membranes. Four solvents—NMP, DMF, DMSO, and THF—were investigated. The HSP results indicated that NMP and DMF are compatible with PVDF, while THF exhibited stronger affinity for PDMS. Accordingly, PVDF was dissolved in NMP and DMF, and PDMS in THF. Additives, including PEG‐400, H 3 PO 4 , and toluene, were incorporated. NMP‐based membranes demonstrated higher hydrophobicity, with the PEG‐400‐modified membrane exhibiting a water contact angle of 104.3°, compared to 83.9° for the DMF‐based system. Membrane porosity ranged from 51.42% to 57.8%. AFM analysis revealed maximum surface roughness (Ra = 5.554 nm; Sq = 7.389 nm) for the PEG‐400‐modified membrane. SEM, XRD, and FTIR analyses confirmed favourable morphology and structural characteristics. During VMD desalination of a 20,000 mg L −1 NaCl solution, the permeate flux decreased from 18.5 to 17.6 kg m −2 h −1 over 180 h, while salt rejection remained approximately 99.77%. The selected membrane exhibited an LEP of approximately 294.5 kPa and a maximum thermal efficiency of 93.70%. The integration of HSP‐guided solvent screening, controlled additive comparison, solution blending, and long‐term VMD validation distinguishes this work from conventional solvent‐screening studies.

The Canadian Journal of Chemical Engineering
Sardar Vallabhbhai National Institute of Technology Surat (IN), Malaviya National Institute of Technology Jaipur (IN)
Membrane Separation Technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon