Effect of Heterogeneous Austenite and Multiscale B2 Precipitates on the Strength–Ductility Balance of Fe–Mn–Al–C–Ni Lightweight Steel

A Fe–29Mn–9Al–1C–6Ni (wt%) lightweight steel is processed by hot rolling followed by solution and aging treatments to obtain a heterogeneous austenitic microstructure containing NiAl‐type B2 precipitates. Microstructural characterization reveals the coexistence of coarse nonrecrystallized (NRX) and fine recrystallized (RX) austenite, together with two categories of B2 precipitates according to their spatial location: grain‐boundary B2 (GB‐B2) precipitates and intragranular B2 (IG‐B2) precipitates. Their formation is associated with the local recrystallization state, stored deformation energy, and solute redistribution. After solution treatment at 950 °C and subsequent aging at 550 °C, the steel exhibits the most favorable strength–ductility balance, with a yield strength of 1259 MPa, a tensile strength of 1459 MPa, and a total elongation of 33.8%. The corresponding specific yield strength reaches 189 MPa·cm 3 ·g −1 . Strengthening analysis indicates that conventional strengthening mechanisms, including solid‐solution, grain‐boundary, dislocation, and B2 precipitation strengthening, provide an estimated yield strength of approximately 1025 MPa, while the remaining contribution of approximately 234 MPa is attributed to heterogeneous deformation‐induced (HDI) strengthening. The favorable strength–ductility balance is therefore associated with the combined effects of heterogeneous recrystallization, B2 precipitation, and HDI‐assisted strain hardening.

Authors

Institutions

Publication Details

Journal
steel research international
Published
2026-11-17
DOI
https://doi.org/10.1002/srin.70808
Primary Topic
Microstructure and Mechanical Properties of Steels
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effect of Heterogeneous Austenite and Multiscale B2 Precipitates on the Strength–Ductility Balance of Fe–Mn–Al–C–Ni Lightweight Steel

guizhi xiao, 金磊 马, Yongyang Min, Jixue Yang et al.
5 links
steel research international
Microstructure and Mechanical Properties of Steels
article

Effect of Heterogeneous Austenite and Multiscale B2 Precipitates on the Strength–Ductility Balance of Fe–Mn–Al–C–Ni Lightweight Steel

guizhi xiao, 金磊 马, Yongyang Min, Jixue Yang, Zhanzhan Gao, Zihao Zhou, Dongyang Li, Zhaolin Meng
article en

Abstract

A Fe–29Mn–9Al–1C–6Ni (wt%) lightweight steel is processed by hot rolling followed by solution and aging treatments to obtain a heterogeneous austenitic microstructure containing NiAl‐type B2 precipitates. Microstructural characterization reveals the coexistence of coarse nonrecrystallized (NRX) and fine recrystallized (RX) austenite, together with two categories of B2 precipitates according to their spatial location: grain‐boundary B2 (GB‐B2) precipitates and intragranular B2 (IG‐B2) precipitates. Their formation is associated with the local recrystallization state, stored deformation energy, and solute redistribution. After solution treatment at 950 °C and subsequent aging at 550 °C, the steel exhibits the most favorable strength–ductility balance, with a yield strength of 1259 MPa, a tensile strength of 1459 MPa, and a total elongation of 33.8%. The corresponding specific yield strength reaches 189 MPa·cm 3 ·g −1 . Strengthening analysis indicates that conventional strengthening mechanisms, including solid‐solution, grain‐boundary, dislocation, and B2 precipitation strengthening, provide an estimated yield strength of approximately 1025 MPa, while the remaining contribution of approximately 234 MPa is attributed to heterogeneous deformation‐induced (HDI) strengthening. The favorable strength–ductility balance is therefore associated with the combined effects of heterogeneous recrystallization, B2 precipitation, and HDI‐assisted strain hardening.

steel research international
Xi'an University of Architecture and Technology (CN), Sinomach (China) (CN), China National Heavy Machinery Research Institute Co., Ltd. (CN)
National Natural Science Foundation of China, Natural Science Basic Research Program of Shaanxi Province
Microstructure and Mechanical Properties of Steels
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon