Advanced detection of small mortar defects in ceramic cladding via active thermography

Ceramic cladding detachment resulting from incomplete mortar filling is a pathological manifestation in building facades, posing safety risks and maintenance costs. While infrared thermography is a prominent non-destructive tool, current literature remains largely constrained to qualitative assessments and macroscopic defects, leaving a knowledge gap regarding the quantitative limits of detecting small, early-stage discontinuities. This study addresses this limitation by applying active infrared thermography in reflection mode to systematically evaluate the detectability limits of small artificial mortar defects, ranging from 5 × 5–20 × 20 mm² (thicknesses from 1 to 4 mm), embedded in a representative full-scale specimen. Two heating configurations, general and localized, were combined with four post-processing techniques based on temporal decomposition and principal component analysis, with performance quantitatively assessed through the signal-to-noise ratio. The results showed that defect thickness was an important factor within the evaluated specimen configuration, in which it is associated with defect position and depth. Discontinuities of 3 and 4 mm produced expressive thermal contrasts under most evaluated conditions, whereas 1 mm defects remained highly sensitive to excitation and processing configurations. A heating duration of 120 s provided the best overall balance between thermal contrast and signal quality. Specifically, principal component thermography combined with nonlinear enhancement under general heating and principal component thermography under localized heating yielded the highest mean SNR at 120 s (0.88 and 0.91, respectively). By producing a measurable thermal response for defects as small as 5 × 5 mm² under specific excitation and processing configurations, this work indicates the potential of short-duration excitation protocols combined with quantitative post-processing for ceramic cladding inspection.

Authors

Institutions

Publication Details

Journal
Construction and Building Materials
Published
2026-11-17
DOI
https://doi.org/10.1016/j.conbuildmat.2026.148900
Primary Topic
Thermography and Photoacoustic Techniques
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Advanced detection of small mortar defects in ceramic cladding via active thermography

Hai Zhang, Henrique Fernandes, Стефано Сфарра, Alisson Figueiredo et al.
Construction and Building Materials
Thermography and Photoacoustic Techniques
article

Advanced detection of small mortar defects in ceramic cladding via active thermography

Hai Zhang, Henrique Fernandes, Стефано Сфарра, Alisson Figueiredo, Carlos Cutrim, Bárbara Lima
article en

Abstract

Ceramic cladding detachment resulting from incomplete mortar filling is a pathological manifestation in building facades, posing safety risks and maintenance costs. While infrared thermography is a prominent non-destructive tool, current literature remains largely constrained to qualitative assessments and macroscopic defects, leaving a knowledge gap regarding the quantitative limits of detecting small, early-stage discontinuities. This study addresses this limitation by applying active infrared thermography in reflection mode to systematically evaluate the detectability limits of small artificial mortar defects, ranging from 5 × 5–20 × 20 mm² (thicknesses from 1 to 4 mm), embedded in a representative full-scale specimen. Two heating configurations, general and localized, were combined with four post-processing techniques based on temporal decomposition and principal component analysis, with performance quantitatively assessed through the signal-to-noise ratio. The results showed that defect thickness was an important factor within the evaluated specimen configuration, in which it is associated with defect position and depth. Discontinuities of 3 and 4 mm produced expressive thermal contrasts under most evaluated conditions, whereas 1 mm defects remained highly sensitive to excitation and processing configurations. A heating duration of 120 s provided the best overall balance between thermal contrast and signal quality. Specifically, principal component thermography combined with nonlinear enhancement under general heating and principal component thermography under localized heating yielded the highest mean SNR at 120 s (0.88 and 0.91, respectively). By producing a measurable thermal response for defects as small as 5 × 5 mm² under specific excitation and processing configurations, this work indicates the potential of short-duration excitation protocols combined with quantitative post-processing for ceramic cladding inspection.

Construction and Building MaterialsVol. 551
Harbin Institute of Technology (CN), University of L'Aquila (IT), Instituto Federal do Maranhão (BR), Universidade Estadual do Maranhão (BR), Universidade Federal de Uberlândia (BR)
Thermography and Photoacoustic Techniques
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon