Passive stabilization of simultaneous droplet generation in a double T-junction microfluidic device

Abstract Stable simultaneous droplet generation remains challenging because hydraulic coupling between interconnected generators can produce pressure disturbances that affect dropletformation and uniformity. Here, we investigate a double T-junction microfluidic device incorporating a downstream ellipsoidal expansion designed to redistribute the pressure field through a gradual variation in hydraulic resistance. Three-dimensional two-phase-flow simulations were performed using COMSOL Multiphysics to investigate droplet formation and downstream pressure redistribution. An analytical hydraulic model was also developed to describe the nonlinear pressure redistribution introduced by the ellipsoidal expansion. Experimental validation was performed using a fabricated polydimethylsiloxane (PDMS) device with water and methanol as dispersed phases (Qd) and mineral oil as the continuous phase (Qc). Four flow-rate ratios, FRR = Qd/Qc = 0.25, 0.50, 0.75, and 1.00, were investigated at a fixed continuous-phase flow rate of Qc = 70µLmin−1. Across the complete experimental dataset, 57,076 individual microdroplets were analyzed. Both fluid systems exhibited a positive linear dependence of Ld/w on the flow-rate ratio, consistent with squeezing-regime droplet formation. For the water oil system (WOS), the numerical and experimental scaling slopes were 0.42 and 1.13, respectively, whereas the methanol oil system (MOS) exhibited particularly close quantitative agreement, with corresponding slopes of 0.68 and 0.66. The experimental relationships remained strongly linear, with R2 =0.98 for WOS and R2 =0.96 for MOS. Statistical characterization further revealed fluid-dependent behavior, with the MOS maintaining a comparatively low coefficient of variation of approximately 7–8% over the investigated operating range. An otherwise equivalent reference device without the downstream ellipsoidal expansion was also experimentally evaluated. Under the same nominal operating conditions, the continuous mineral oil phase flowed through the main channel, whereas the dispersed phases did not advance sufficiently into the T-junctions to establish sustained channel blockage and droplet pinch-off. In contrast, the chamber-equipped device sustained simultaneous droplet generation for both Qd. These results support the ellipsoidal expansion as a passive geometric pressure-redistribution strategy that contributes to sustaining simultaneous droplet generation while reducing the effects associated with hydraulic coupling and preserving the characteristic droplet-length scaling behavior of the squeezing regime.

Authors

Institutions

Publication Details

Journal
Journal of Micromechanics and Microengineering
Published
2026-11-17
DOI
https://doi.org/10.1088/1361-6439/aec301
Primary Topic
Innovative Microfluidic and Catalytic Techniques Innovation
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Passive stabilization of simultaneous droplet generation in a double T-junction microfluidic device

Jonathan U Álvarez-Martínez, Rigoberto Castro‐Beltrán
1 links
Journal of Micromechanics and Microengineering
Innovative Microfluidic and Catalytic Techniques Innovation
article

Passive stabilization of simultaneous droplet generation in a double T-junction microfluidic device

Jonathan U Álvarez-Martínez, Rigoberto Castro‐Beltrán
article en

Abstract

Abstract Stable simultaneous droplet generation remains challenging because hydraulic coupling between interconnected generators can produce pressure disturbances that affect dropletformation and uniformity. Here, we investigate a double T-junction microfluidic device incorporating a downstream ellipsoidal expansion designed to redistribute the pressure field through a gradual variation in hydraulic resistance. Three-dimensional two-phase-flow simulations were performed using COMSOL Multiphysics to investigate droplet formation and downstream pressure redistribution. An analytical hydraulic model was also developed to describe the nonlinear pressure redistribution introduced by the ellipsoidal expansion. Experimental validation was performed using a fabricated polydimethylsiloxane (PDMS) device with water and methanol as dispersed phases (Qd) and mineral oil as the continuous phase (Qc). Four flow-rate ratios, FRR = Qd/Qc = 0.25, 0.50, 0.75, and 1.00, were investigated at a fixed continuous-phase flow rate of Qc = 70µLmin−1. Across the complete experimental dataset, 57,076 individual microdroplets were analyzed. Both fluid systems exhibited a positive linear dependence of Ld/w on the flow-rate ratio, consistent with squeezing-regime droplet formation. For the water oil system (WOS), the numerical and experimental scaling slopes were 0.42 and 1.13, respectively, whereas the methanol oil system (MOS) exhibited particularly close quantitative agreement, with corresponding slopes of 0.68 and 0.66. The experimental relationships remained strongly linear, with R2 =0.98 for WOS and R2 =0.96 for MOS. Statistical characterization further revealed fluid-dependent behavior, with the MOS maintaining a comparatively low coefficient of variation of approximately 7–8% over the investigated operating range. An otherwise equivalent reference device without the downstream ellipsoidal expansion was also experimentally evaluated. Under the same nominal operating conditions, the continuous mineral oil phase flowed through the main channel, whereas the dispersed phases did not advance sufficiently into the T-junctions to establish sustained channel blockage and droplet pinch-off. In contrast, the chamber-equipped device sustained simultaneous droplet generation for both Qd. These results support the ellipsoidal expansion as a passive geometric pressure-redistribution strategy that contributes to sustaining simultaneous droplet generation while reducing the effects associated with hydraulic coupling and preserving the characteristic droplet-length scaling behavior of the squeezing regime.

Journal of Micromechanics and Microengineering
Universidad de Guanajuato (MX)
Innovative Microfluidic and Catalytic Techniques Innovation
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon