Nanoscale Interfacial Engineering of Printable Polysaccharide Hydrogels for Simultaneous High Porosity and Wet-State Mechanical Robustness

Direct ink writing (DIW) provides a promising route to fabricate porous hydrogel constructs with programmable architectures, yet highly hydrated printed networks often suffer from swelling-induced softening and structural instability under wet conditions. Herein, we report a nanoscale interfacial engineering strategy for DIW of mechanically robust, hierarchically porous polysaccharide hydrogels. Purified silanol-rich silica-fume nanoparticles were incorporated into a sodium alginate/chitosan polyelectrolyte ink, followed by printing, freeze-drying, and sequential acetic acid/Ca2+ crosslinking. The resulting SCS hydrogels showed well-preserved printed architectures, interconnected pore networks, and homogeneous silica distribution. Silica-polysaccharide hydrogen-bonding interfaces, SA/CS polyelectrolyte complexation, and Ca2+-mediated alginate crosslinking jointly formed a constrained multilevel network that suppressed swelling-induced structural loosening. Consequently, the SCS hydrogels maintained porosity above 90%, reduced equilibrium swelling by approximately 70% compared with the single-network control, and achieved a wet-state compressive modulus of 913 kPa through combined nanoscale interfacial reinforcement and programmable printed architecture, while exhibiting good structural recovery under cyclic deformation. In vitro evaluations further indicated favorable cytocompatibility and osteogenesis-related cellular responses, supporting further evaluation of SCS hydrogels as mechanically stable printable bio-based scaffolds for bone-tissue-engineering-related applications. This work demonstrates a DIW-compatible nanoscale interfacial design strategy for decoupling high porosity from swelling-induced softening and wet-state mechanical deterioration, providing a useful structure-property-processing design framework for structurally stable porous hydrogel materials.

Authors

Institutions

Publication Details

Journal
ACS Applied Materials & Interfaces
Published
2026-11-16
DOI
https://doi.org/10.1021/acsami.6c15794
Primary Topic
3D Printing in Biomedical Research
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Nanoscale Interfacial Engineering of Printable Polysaccharide Hydrogels for Simultaneous High Porosity and Wet-State Mechanical Robustness

B. Q. Zhang, Yantang Zhao, Yueyan Zheng, Qiangqiang Zhang et al.
ACS Applied Materials & Interfaces
3D Printing in Biomedical Research
article

Nanoscale Interfacial Engineering of Printable Polysaccharide Hydrogels for Simultaneous High Porosity and Wet-State Mechanical Robustness

B. Q. Zhang, Yantang Zhao, Yueyan Zheng, Qiangqiang Zhang, Xingyi Zhang
article en

Abstract

Direct ink writing (DIW) provides a promising route to fabricate porous hydrogel constructs with programmable architectures, yet highly hydrated printed networks often suffer from swelling-induced softening and structural instability under wet conditions. Herein, we report a nanoscale interfacial engineering strategy for DIW of mechanically robust, hierarchically porous polysaccharide hydrogels. Purified silanol-rich silica-fume nanoparticles were incorporated into a sodium alginate/chitosan polyelectrolyte ink, followed by printing, freeze-drying, and sequential acetic acid/Ca2+ crosslinking. The resulting SCS hydrogels showed well-preserved printed architectures, interconnected pore networks, and homogeneous silica distribution. Silica-polysaccharide hydrogen-bonding interfaces, SA/CS polyelectrolyte complexation, and Ca2+-mediated alginate crosslinking jointly formed a constrained multilevel network that suppressed swelling-induced structural loosening. Consequently, the SCS hydrogels maintained porosity above 90%, reduced equilibrium swelling by approximately 70% compared with the single-network control, and achieved a wet-state compressive modulus of 913 kPa through combined nanoscale interfacial reinforcement and programmable printed architecture, while exhibiting good structural recovery under cyclic deformation. In vitro evaluations further indicated favorable cytocompatibility and osteogenesis-related cellular responses, supporting further evaluation of SCS hydrogels as mechanically stable printable bio-based scaffolds for bone-tissue-engineering-related applications. This work demonstrates a DIW-compatible nanoscale interfacial design strategy for decoupling high porosity from swelling-induced softening and wet-state mechanical deterioration, providing a useful structure-property-processing design framework for structurally stable porous hydrogel materials.

ACS Applied Materials & Interfaces
Ministry of Education of the People's Republic of China (CN), Lanzhou University (CN)
3D Printing in Biomedical Research
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon