Effect of Boron-Free Niobium Addition on the Hot Tearing Susceptibility of the AlSi5Cu2Mg Alloy

The AlSi5Cu2Mg alloy for cylinder-head castings is known for its pronounced susceptibility to hot tearing. This study examines how niobium additions affect the hot tearing susceptibility (HTS) of this alloy. Niobium was introduced via an AlNb10 master alloy in nominal amounts of 0.10, 0.15 and 0.20 wt.% (measured 0.049, 0.063 and 0.076 wt.%). HTS was evaluated quantitatively, by three variants of the hot tearing index (HTI) determined from tears on four arms of a five-arm restrained-contraction mould, and qualitatively, from the load recorded on the fifth, anchored arm. All niobium additions reduced the HTI values. The lowest values were obtained for the nominal 0.15 wt.% addition (HTI1 = 0.18, HTI2 = 0.60 and HTI3 = 0.17 compared with 0.93, 2.35 and 1.91 for the reference alloy). In the qualitative evaluation, this was the only alloy in which no anchored arm separated. In contrast, two anchored arms of the 0.20 wt.% Nb alloy separated immediately and a third transferred less than 120 N. This occurred despite the finest dendritic structure (secondary dendrite arm spacing 16.58 versus 25.76 µm). Niobium can therefore reduce the HTS of the AlSi5Cu2Mg alloy, with the most favourable effect at a nominal addition of 0.15 wt.%.

Authors

Institutions

Publication Details

Journal
Metals
Published
2026-11-17
DOI
https://doi.org/10.3390/met16111261
Primary Topic
Aluminum Alloy Microstructure Properties
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effect of Boron-Free Niobium Addition on the Hot Tearing Susceptibility of the AlSi5Cu2Mg Alloy

Marek Matejka, Dana Bolibruchová, Martina Sýkorová
5 links
Metals
Aluminum Alloy Microstructure Properties
article

Effect of Boron-Free Niobium Addition on the Hot Tearing Susceptibility of the AlSi5Cu2Mg Alloy

Marek Matejka, Dana Bolibruchová, Martina Sýkorová
article en

Abstract

The AlSi5Cu2Mg alloy for cylinder-head castings is known for its pronounced susceptibility to hot tearing. This study examines how niobium additions affect the hot tearing susceptibility (HTS) of this alloy. Niobium was introduced via an AlNb10 master alloy in nominal amounts of 0.10, 0.15 and 0.20 wt.% (measured 0.049, 0.063 and 0.076 wt.%). HTS was evaluated quantitatively, by three variants of the hot tearing index (HTI) determined from tears on four arms of a five-arm restrained-contraction mould, and qualitatively, from the load recorded on the fifth, anchored arm. All niobium additions reduced the HTI values. The lowest values were obtained for the nominal 0.15 wt.% addition (HTI1 = 0.18, HTI2 = 0.60 and HTI3 = 0.17 compared with 0.93, 2.35 and 1.91 for the reference alloy). In the qualitative evaluation, this was the only alloy in which no anchored arm separated. In contrast, two anchored arms of the 0.20 wt.% Nb alloy separated immediately and a third transferred less than 120 N. This occurred despite the finest dendritic structure (secondary dendrite arm spacing 16.58 versus 25.76 µm). Niobium can therefore reduce the HTS of the AlSi5Cu2Mg alloy, with the most favourable effect at a nominal addition of 0.15 wt.%.

MetalsVol. 16(11)
University of Žilina (SK)
Aluminum Alloy Microstructure Properties
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon