Influences of liquid viscosities on the critical diameter of drop coalescence on a liquid–liquid interface
Abstract A drop generally does not completely merge on a liquid–liquid interface, but partially coalesces leaving a small daughter drop, known as partial coalescence in separation engineering. The present work adopted an interface capturing model to investigate coalescence of drops on a liquid–liquid interface. For most liquid–liquid pairs, it is identified that there is a critical diameter D * below which only complete coalescence is observed. The critical diameter D * is found to be a function of the ambient liquid viscosity and the drop liquid viscosity. With increase of the ambient liquid viscosity μ c , the critical diameter D * also increases. It follows that the viscous effect of the ambient liquid on hindering partial coalescence might be counteracted by increasing the drop diameter. However, as the drop liquid viscosity μ d increases, the critical diameter D * first decreases and then increases. This is because the drop liquid viscosity μ d not only influences the horizontal contraction of the liquid neck, but also affects the vertical liquid drainage. A liquid neck contraction and expansion model is adopted to explain these phenomena, which is helpful to understand mechanisms of partial coalescence. Finally, a correlation was proposed to predict the critical diameter D * with relative errors less than 10%.
Authors
- Xiong Yu (ORCID: https://orcid.org/0000-0002-7879-9014)
- Lang Pan
Institutions
- Hebei University of Technology (CN)
Publication Details
- Journal
- The Canadian Journal of Chemical Engineering
- Published
- 2026-11-17
- DOI
- https://doi.org/10.1002/cjce.70649
- Primary Topic
- Fluid Dynamics and Heat Transfer
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- National Natural Science Foundation of China
- Natural Science Foundation of Hebei Province