Numerical Simulation of the Anisotropy and Scale Effects for Jointed Rock Masses

Joint defects are common discontinuous structures in subway tunnel engineering and significantly affect the stability of surrounding rock masses. Jointed rock models with different sizes and joint orientations were established using the discrete element method (DEM), and uniaxial compression tests were conducted. The effects of joint orientation and model size on the mechanical properties, failure modes, and microcrack evolution were systematically investigated. The results indicate that the mechanical behavior of jointed rock masses exhibits pronounced size effects and anisotropic characteristics. Rock masses containing vertically oriented joints exhibit relatively higher strength and elastic modulus, whereas those with horizontally oriented joints demonstrate comparatively weaker mechanical performance. As the model size increases, both the strength and elastic modulus decrease, revealing a typical size effect. The failure mode is jointly controlled by joint orientation and model size. In small-sized models, failure is primarily characterized by through-going cracks propagating along the principal stress direction, and the influence of joint orientation is relatively limited. With increasing model size, the failure mode gradually evolves from localized crack coalescence to dispersed cracking. Moreover, crack propagation behavior varies significantly with joint orientation. In rock masses with vertical joints, cracks predominantly propagate along the principal stress direction, whereas in specimens with horizontal joints, cracks develop both along the joint plane and the direction perpendicular to the joint. Rock masses containing horizontal joints generate a larger number of microcracks and experience more severe damage, while those with vertical joints develop fewer cracks that mainly propagate along the joint orientation. As the model size increases, the total number of microcracks decreases and their spatial distribution becomes increasingly dispersed. These findings provide a theoretical basis for evaluating the stability of jointed surrounding rock in subway tunnel engineering.

Authors

Institutions

Publication Details

Journal
Eng—Advances in Engineering
Published
2026-11-17
DOI
https://doi.org/10.3390/eng7110651
Primary Topic
Rock Mechanics and Modeling
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Numerical Simulation of the Anisotropy and Scale Effects for Jointed Rock Masses

Song Hanfeng, Peiyun Qiu, Guangjun Cui, Aobo Zhang et al.
2 links
Eng—Advances in Engineering
Rock Mechanics and Modeling
article

Numerical Simulation of the Anisotropy and Scale Effects for Jointed Rock Masses

Song Hanfeng, Peiyun Qiu, Guangjun Cui, Aobo Zhang, Haiming Lin, Haitao Yu
article en

Abstract

Joint defects are common discontinuous structures in subway tunnel engineering and significantly affect the stability of surrounding rock masses. Jointed rock models with different sizes and joint orientations were established using the discrete element method (DEM), and uniaxial compression tests were conducted. The effects of joint orientation and model size on the mechanical properties, failure modes, and microcrack evolution were systematically investigated. The results indicate that the mechanical behavior of jointed rock masses exhibits pronounced size effects and anisotropic characteristics. Rock masses containing vertically oriented joints exhibit relatively higher strength and elastic modulus, whereas those with horizontally oriented joints demonstrate comparatively weaker mechanical performance. As the model size increases, both the strength and elastic modulus decrease, revealing a typical size effect. The failure mode is jointly controlled by joint orientation and model size. In small-sized models, failure is primarily characterized by through-going cracks propagating along the principal stress direction, and the influence of joint orientation is relatively limited. With increasing model size, the failure mode gradually evolves from localized crack coalescence to dispersed cracking. Moreover, crack propagation behavior varies significantly with joint orientation. In rock masses with vertical joints, cracks predominantly propagate along the principal stress direction, whereas in specimens with horizontal joints, cracks develop both along the joint plane and the direction perpendicular to the joint. Rock masses containing horizontal joints generate a larger number of microcracks and experience more severe damage, while those with vertical joints develop fewer cracks that mainly propagate along the joint orientation. As the model size increases, the total number of microcracks decreases and their spatial distribution becomes increasingly dispersed. These findings provide a theoretical basis for evaluating the stability of jointed surrounding rock in subway tunnel engineering.

Eng—Advances in EngineeringVol. 7(11)
Guangdong University of Technology (CN), Guangzhou Metro Group (China) (CN), Guangdong Provincial Academy of Building Research Group (CN), South China University of Technology (CN)
Basic and Applied Basic Research Foundation of Guangdong Province
Rock Mechanics and Modeling
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon