Enhancement of Corrosion Resistance of Mg-Y-Gd-Zr Alloy Through Coating of PHEMA-g-PCL Copolymer

Magnesium alloys are attractive biodegradable biomaterials, but their high corrosion rate in physiological fluids limits their clinical use. Polymeric coatings with tailored architecture offer a route to control degradation more precisely than commercial biopolymers. Herein, a grafted copolymer of poly(2-hydroxyethyl methacrylate) and polycaprolactone (PHEMA-g-PCL) via a one-pot combination of reversible addition-fragmentation chain-transfer (RAFT) polymerization and ring-opening polymerization (ROP), yielded a copolymer with Mn of 63.9 kg∙mol−1 and Mw/Mn ratio of 1.21, confirmed by Size Exclusion Chromatography (SEC). The chemical structure of the copolymer was confirmed by Nuclear Magnetic Resonance (NMR) and Fourier Transformation Infrared (FTIR) spectroscopy. The alloy substrate, a hot-rolled Mg-Y-Gd-Zr alloy, was dip-coated using 5 wt.% and 10 wt.% PHEMA-g-PCL solutions, and corrosion behavior was evaluated by hydrogen evolution and pH monitoring during immersion in Hank’s solution at 37 °C. Uncoated samples corroded fastest ((0.0145 ± 0.0009) mL·mm−2·h−1) and perforated within 3 days, whereas the 10 wt.% PHEMA-g-PCL coating, which formed a continuous film, reduced the corrosion rate to ((0.0045 ± 0.0002) mL·mm−2·h−1) and preserved structural integrity for over 170 h. The 5 wt.% coating only partially covered the substrate, resulting in more variable corrosion behavior, (0.0068 ± 0.0029) mL·mm−2·h−1. These results establish PHEMA-g-PCL as a proof-of-concept coating strategy for tuning Mg alloy degradation.

Authors

Institutions

Publication Details

Journal
Inorganics
Published
2026-11-17
DOI
https://doi.org/10.3390/inorganics14110292
Primary Topic
Magnesium Alloys: Properties and Applications
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Enhancement of Corrosion Resistance of Mg-Y-Gd-Zr Alloy Through Coating of PHEMA-g-PCL Copolymer

F Florenzáno, Viviane Lima Freitas da Silva, Carlos Ângelo Nunes, Igor Wallace Ferreira Silva et al.
1 links
Inorganics
Magnesium Alloys: Properties and Applications
article

Enhancement of Corrosion Resistance of Mg-Y-Gd-Zr Alloy Through Coating of PHEMA-g-PCL Copolymer

F Florenzáno, Viviane Lima Freitas da Silva, Carlos Ângelo Nunes, Igor Wallace Ferreira Silva, Rodolfo da Silva Teixeira, Bruno Xavier de Freitas, Vitória Melo Silveira
article en

Abstract

Magnesium alloys are attractive biodegradable biomaterials, but their high corrosion rate in physiological fluids limits their clinical use. Polymeric coatings with tailored architecture offer a route to control degradation more precisely than commercial biopolymers. Herein, a grafted copolymer of poly(2-hydroxyethyl methacrylate) and polycaprolactone (PHEMA-g-PCL) via a one-pot combination of reversible addition-fragmentation chain-transfer (RAFT) polymerization and ring-opening polymerization (ROP), yielded a copolymer with Mn of 63.9 kg∙mol−1 and Mw/Mn ratio of 1.21, confirmed by Size Exclusion Chromatography (SEC). The chemical structure of the copolymer was confirmed by Nuclear Magnetic Resonance (NMR) and Fourier Transformation Infrared (FTIR) spectroscopy. The alloy substrate, a hot-rolled Mg-Y-Gd-Zr alloy, was dip-coated using 5 wt.% and 10 wt.% PHEMA-g-PCL solutions, and corrosion behavior was evaluated by hydrogen evolution and pH monitoring during immersion in Hank’s solution at 37 °C. Uncoated samples corroded fastest ((0.0145 ± 0.0009) mL·mm−2·h−1) and perforated within 3 days, whereas the 10 wt.% PHEMA-g-PCL coating, which formed a continuous film, reduced the corrosion rate to ((0.0045 ± 0.0002) mL·mm−2·h−1) and preserved structural integrity for over 170 h. The 5 wt.% coating only partially covered the substrate, resulting in more variable corrosion behavior, (0.0068 ± 0.0029) mL·mm−2·h−1. These results establish PHEMA-g-PCL as a proof-of-concept coating strategy for tuning Mg alloy degradation.

InorganicsVol. 14(11)
Universidade de São Paulo (BR), Universidade Estadual de Campinas (UNICAMP) (BR), Monash University (AU), Universidade Federal de Itajubá (BR)
Fundação de Amparo à Pesquisa do Estado de São Paulo, Fundação de Amparo à Pesquisa do Estado de Minas Gerais
Magnesium Alloys: Properties and Applications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon