Carbon Footprint Reduction in Road Construction: Experimental Evaluation of Sustainable Materials for Rigid Pavement Concrete

Road construction consumes large quantities of cement, aggregates, bituminous materials and fossil fuel energy. The production and transportation of these materials, together with on-site construction operations, contribute to greenhouse gas emissions. This paper examines the use of natural and waste-derived materials in rigid pavement concrete, based on the experimental programme reported in the supplied thesis. The materials considered are human hair, bamboo pieces/fibre, coconut (coir) fibre, ground granulated blast furnace slag (GGBS) and fly ash. The study compares compressive strength at different curing ages and material replacement or addition levels. The reported results indicate that human hair addition increased the 28-day M30 compressive strength from 33.60 MPa for the control mix to 37.25 MPa at 3% addition. Coconut fibre produced the highest reported 28-day strength of 40.50 MPa at 5% addition. For GGBS, the highest 28-day average strength was 34.22 MPa at 30% replacement, compared with 29.98 MPa for the control. In contrast, the bamboo series showed a progressive reduction in compressive strength as the reported replacement level increased, while fly ash replacement above 5% reduced 28- day strength in the reported series. These results demonstrate that sustainable materials must be proportioned individually rather than assumed to improve all concrete properties at every dosage. The thesis identifies potential environmental benefits through reduced use of conventional cement and aggregates and the productive use of waste resources. However, a project-specific lifecycle carbon inventory was not reported; therefore, this paper does not claim a quantified percentage reduction in CO₂ emissions. Further work should combine mechanical testing with a transparent life-cycle assessment and field validation.

Authors

Publication Details

Journal
International Journal for Research in Applied Science and Engineering Technology
Published
2026-11-17
DOI
https://doi.org/10.22214/ijraset.2026.85776
Primary Topic
Concrete and Cement Materials Research
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Carbon Footprint Reduction in Road Construction: Experimental Evaluation of Sustainable Materials for Rigid Pavement Concrete

P. M. Thorat, Dnyaneshwari Balasaheb Bhegade
4 links
International Journal for Research in Applied Science and Engineering Technology
Concrete and Cement Materials Research
article

Carbon Footprint Reduction in Road Construction: Experimental Evaluation of Sustainable Materials for Rigid Pavement Concrete

P. M. Thorat, Dnyaneshwari Balasaheb Bhegade
article en

Abstract

Road construction consumes large quantities of cement, aggregates, bituminous materials and fossil fuel energy. The production and transportation of these materials, together with on-site construction operations, contribute to greenhouse gas emissions. This paper examines the use of natural and waste-derived materials in rigid pavement concrete, based on the experimental programme reported in the supplied thesis. The materials considered are human hair, bamboo pieces/fibre, coconut (coir) fibre, ground granulated blast furnace slag (GGBS) and fly ash. The study compares compressive strength at different curing ages and material replacement or addition levels. The reported results indicate that human hair addition increased the 28-day M30 compressive strength from 33.60 MPa for the control mix to 37.25 MPa at 3% addition. Coconut fibre produced the highest reported 28-day strength of 40.50 MPa at 5% addition. For GGBS, the highest 28-day average strength was 34.22 MPa at 30% replacement, compared with 29.98 MPa for the control. In contrast, the bamboo series showed a progressive reduction in compressive strength as the reported replacement level increased, while fly ash replacement above 5% reduced 28- day strength in the reported series. These results demonstrate that sustainable materials must be proportioned individually rather than assumed to improve all concrete properties at every dosage. The thesis identifies potential environmental benefits through reduced use of conventional cement and aggregates and the productive use of waste resources. However, a project-specific lifecycle carbon inventory was not reported; therefore, this paper does not claim a quantified percentage reduction in CO₂ emissions. Further work should combine mechanical testing with a transparent life-cycle assessment and field validation.

International Journal for Research in Applied Science and Engineering TechnologyVol. 14(11)
Responsible consumption and production, Climate action, Industry, innovation and infrastructure, Sustainable cities and communities
Concrete and Cement Materials Research
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon