Calcium Oxide-Based Hybrid Nanomaterials for Corrosion Protection: A Critical Review of Structure–Electrochemical Performance Relationships, Interfacial Mechanisms and Data-Driven Design

Calcium oxide and the calcium phases derived from it have attracted attention as low-cost, low-toxicity and frequently waste-derived constituents of corrosion-protective materials, at a time when chromate-based technologies are being withdrawn and nanostructured coatings are expected to provide both barrier and active protection. The literature that describes calcium oxide-based hybrid nanomaterials is, however, dispersed across organic coatings, inorganic pigments, stimuli-responsive containers, layered double hydroxides, magnesium alloy design, plasma electrolytic oxidation and sol–gel layers, and it has rarely been examined as a single body of evidence. This critical narrative review synthesises peer-reviewed literature identified through structured searching of multidisciplinary and open scholarly indexes, supplemented by citation tracking and retraction checking, with eligibility determined by first public journal publication up to September 2026. The synthesis indicates that calcium oxide is better regarded as a reactive precursor than as a stable protective phase, because hydration and carbonation transform it into calcium hydroxide, amorphous and crystalline calcium carbonates or mixed carbonates under most service conditions. Protective effects attributed to calcium oxide are therefore mediated mainly by interfacial alkalinisation, calcium-driven precipitation at cathodic sites, ion exchange, pH-triggered container dissolution and, in magnesium, In situ formation of magnesium oxide and calcium-bearing intermetallic phases. The evidence is strongest for calcium carbonate containers, calcium-exchanged silica pigments, calcium–aluminium layered double hydroxides and dilute calcium oxide additions to magnesium alloys, and weakest for calcium oxide nanoparticles used as dissolved inhibitors in acidic media, where neutralisation, short exposures and doubtful adsorption analyses confound interpretation. Structure–performance relationships are non-monotonic: optimum loadings exist, excess calcium promotes micro-galvanic attack in magnesium, and alkalinity can accelerate cathodic delamination. Data-driven design remains largely confined to organic inhibitors and generic coatings, and no curated, phase-resolved dataset for calcium-based hybrids exists. Progress will require post-exposure phase identification, standardised long-duration electrochemical protocols, reporting of negative results and machine-learning workflows grounded in physically meaningful descriptors. Calcium oxide-based hybrids are a credible but still immature design space whose promise depends on controlling, rather than ignoring, calcium phase evolution.

Authors

Institutions

Publication Details

Journal
Asian Journal of Applied Chemistry Research
Published
2026-11-17
DOI
https://doi.org/10.9734/ajacr/2026/v17i4439
Primary Topic
Corrosion Behavior and Inhibition
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Calcium Oxide-Based Hybrid Nanomaterials for Corrosion Protection: A Critical Review of Structure–Electrochemical Performance Relationships, Interfacial Mechanisms and Data-Driven Design

Okon E. Okon, Ekemini Johnson Obosi, Kufre Edet Essien, Idaraesit A. Ite
Asian Journal of Applied Chemistry Research
Corrosion Behavior and Inhibition
article

Calcium Oxide-Based Hybrid Nanomaterials for Corrosion Protection: A Critical Review of Structure–Electrochemical Performance Relationships, Interfacial Mechanisms and Data-Driven Design

Okon E. Okon, Ekemini Johnson Obosi, Kufre Edet Essien, Idaraesit A. Ite
article en

Abstract

Calcium oxide and the calcium phases derived from it have attracted attention as low-cost, low-toxicity and frequently waste-derived constituents of corrosion-protective materials, at a time when chromate-based technologies are being withdrawn and nanostructured coatings are expected to provide both barrier and active protection. The literature that describes calcium oxide-based hybrid nanomaterials is, however, dispersed across organic coatings, inorganic pigments, stimuli-responsive containers, layered double hydroxides, magnesium alloy design, plasma electrolytic oxidation and sol–gel layers, and it has rarely been examined as a single body of evidence. This critical narrative review synthesises peer-reviewed literature identified through structured searching of multidisciplinary and open scholarly indexes, supplemented by citation tracking and retraction checking, with eligibility determined by first public journal publication up to September 2026. The synthesis indicates that calcium oxide is better regarded as a reactive precursor than as a stable protective phase, because hydration and carbonation transform it into calcium hydroxide, amorphous and crystalline calcium carbonates or mixed carbonates under most service conditions. Protective effects attributed to calcium oxide are therefore mediated mainly by interfacial alkalinisation, calcium-driven precipitation at cathodic sites, ion exchange, pH-triggered container dissolution and, in magnesium, In situ formation of magnesium oxide and calcium-bearing intermetallic phases. The evidence is strongest for calcium carbonate containers, calcium-exchanged silica pigments, calcium–aluminium layered double hydroxides and dilute calcium oxide additions to magnesium alloys, and weakest for calcium oxide nanoparticles used as dissolved inhibitors in acidic media, where neutralisation, short exposures and doubtful adsorption analyses confound interpretation. Structure–performance relationships are non-monotonic: optimum loadings exist, excess calcium promotes micro-galvanic attack in magnesium, and alkalinity can accelerate cathodic delamination. Data-driven design remains largely confined to organic inhibitors and generic coatings, and no curated, phase-resolved dataset for calcium-based hybrids exists. Progress will require post-exposure phase identification, standardised long-duration electrochemical protocols, reporting of negative results and machine-learning workflows grounded in physically meaningful descriptors. Calcium oxide-based hybrids are a credible but still immature design space whose promise depends on controlling, rather than ignoring, calcium phase evolution.

Asian Journal of Applied Chemistry ResearchVol. 17(4)
Akwa Ibom State University (NG), Akwa Ibom State Polytechnic (NG)
Corrosion Behavior and Inhibition
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon