Physical calibration and signal periodic updates to synchronize IMUs for 5-day continuous knee flexion tracking

Wearable inertial measurement unit (IMU) sensors provide a promising method to assess real-world human motion kinematics. However, multi-day multi-IMU tracking is difficult due to the desynchronization driven by inaccurate IMU clocks. In this study, 15 volunteers wore IMUs continuously on their thighs and shanks for 5 weekdays (Mon-Fri), which included 3 repeated in-lab motion capture sessions. We synchronized thigh and shank IMUs using two methods. The first was physical calibration, where we maneuvered the IMUs in a rigid holder to produce sync signals pre-donning (Mon) and post-doffing (Fri), then linearly resampled data from one IMU to match the other via cross-correlation. The second was signal-based periodic updates, where we shifted IMU clocks hourly based on the timewise alignment of preprocessed body-worn acceleration signals. After syncing, we used sensor-to-segment alignment and accelerometer-gyroscope fusion to estimate knee flexion and compared results to camera-based motion capture. Physical calibration alone removed clock offset in most cases, where IMU-estimated knee flexion generally matched motion capture (correlation ≥0.944; root-mean-square difference RMSD ≤6.9 degrees). But in some participants, residual mid-week desynchronization (~0.2s) resulted in misestimated knee flexion (Wed: RMSD up to ~19 degrees). After applying signal-based updates or combining it with physical calibration, IMU matched motion capture on all 3 days (Mon: r ≥0.975, RMSD ≤6.1 degrees; Wed: r ≥0.971, RMSD ≤6.2 degrees, Fri: r ≥0.977; RMSD ≤5.9 degrees). Our multi-modal synchronization enables week-long knee flexion tracking and lays a foundation for advanced syncing tools, for improving the feasibility of wearable multi-IMU systems to continuously monitor real-world knee kinematics in clinical studies.

Authors

Institutions

Publication Details

Journal
medRxiv
Published
2026-11-16
DOI
https://doi.org/10.64898/2026.11.14.26368098
Primary Topic
Inertial Sensor and Navigation
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Physical calibration and signal periodic updates to synchronize IMUs for 5-day continuous knee flexion tracking

Ke Song, Josh R. Baxter
medRxiv
Inertial Sensor and Navigation
preprint

Physical calibration and signal periodic updates to synchronize IMUs for 5-day continuous knee flexion tracking

Ke Song, Josh R. Baxter
preprint en

Abstract

Wearable inertial measurement unit (IMU) sensors provide a promising method to assess real-world human motion kinematics. However, multi-day multi-IMU tracking is difficult due to the desynchronization driven by inaccurate IMU clocks. In this study, 15 volunteers wore IMUs continuously on their thighs and shanks for 5 weekdays (Mon-Fri), which included 3 repeated in-lab motion capture sessions. We synchronized thigh and shank IMUs using two methods. The first was physical calibration, where we maneuvered the IMUs in a rigid holder to produce sync signals pre-donning (Mon) and post-doffing (Fri), then linearly resampled data from one IMU to match the other via cross-correlation. The second was signal-based periodic updates, where we shifted IMU clocks hourly based on the timewise alignment of preprocessed body-worn acceleration signals. After syncing, we used sensor-to-segment alignment and accelerometer-gyroscope fusion to estimate knee flexion and compared results to camera-based motion capture. Physical calibration alone removed clock offset in most cases, where IMU-estimated knee flexion generally matched motion capture (correlation ≥0.944; root-mean-square difference RMSD ≤6.9 degrees). But in some participants, residual mid-week desynchronization (~0.2s) resulted in misestimated knee flexion (Wed: RMSD up to ~19 degrees). After applying signal-based updates or combining it with physical calibration, IMU matched motion capture on all 3 days (Mon: r ≥0.975, RMSD ≤6.1 degrees; Wed: r ≥0.971, RMSD ≤6.2 degrees, Fri: r ≥0.977; RMSD ≤5.9 degrees). Our multi-modal synchronization enables week-long knee flexion tracking and lays a foundation for advanced syncing tools, for improving the feasibility of wearable multi-IMU systems to continuously monitor real-world knee kinematics in clinical studies.

medRxiv
University of Pennsylvania (US)
Inertial Sensor and Navigation
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon