Selective polyolefin conversion to ethylene in a hierarchical Joule‐heated reactor
Abstract Direct conversion of polyolefin waste into ethylene is hindered by poor control over heat transfer, intermediate transport, and secondary cracking. Here we introduce a catalytic spatiotemporal Joule‐heating strategy integrating polymer melting, transport, and catalytic conversion within a three‐layer architecture. Transient pulses create a localized high‐temperature catalytic zone while underlying layers remain thermally buffered. Experiments and simulations support a thermal‐catalytic control involving progressive cracking, localized catalytic conversion, and rapid light‐product removal. Under optimized conditions, low‐density polyethylene affords a C 1 – C 5 hydrocarbon yield of 96.0 wt%, an ethylene molar selectivity of 49.4% based on the quantified C 1 – C 5 gaseous hydrocarbons, and a specific ethylene yield of 14.3 mmol g −1 . The strategy also accommodates other polyolefins and post‐consumer plastics. Within the defined life‐cycle boundary, cumulative energy demand and greenhouse‐gas emissions decrease by approximately 47.7% and 36.5%, respectively, relative to the conventional PE ‐to‐naphtha and steam‐cracking route.
Authors
- Mingyue Yan
- Zhongjian Li (ORCID: https://orcid.org/0000-0002-3685-381X)
- Bin Yang (ORCID: https://orcid.org/0000-0002-5136-9743)
- Lecheng Lei (ORCID: https://orcid.org/0000-0002-4471-5898)
- Huiyang Bi (ORCID: https://orcid.org/0000-0002-4371-8130)
- Liang Wang (ORCID: https://orcid.org/0000-0002-5826-1866)
- Bingcheng Lin (ORCID: https://orcid.org/0000-0001-7411-544X)
- Haiyang He
- Zhichun Huang
- Chen Sun
Institutions
- University of Chinese Academy of Sciences (CN)
- Zhejiang University (CN)
Publication Details
- Journal
- AIChE Journal
- Published
- 2026-11-16
- DOI
- https://doi.org/10.1002/aic.70780
- Primary Topic
- Thermochemical Biomass Conversion Processes
- Type
- article
- Field-Weighted Citation Impact
- 0.00