Effects of large chamfer and its angle on the performance of polycrystalline diamond compacts
Polycrystalline diamond compact (PDC) bits are the mainstream rock-breaking tools in oil and gas drilling, yet their cutters are highly susceptible to premature failure under the high-temperature, high-pressure, and heterogeneous formations encountered in deep wells. The chamfer angle directly governs the sharpness and chipping resistance of the cutting edge; however, the influence of large chamfer angles on cutter performance remains poorly understood. To address this, we fabricated 1613-specification PDC cutters and machined them by laser engraving into four chamfer geometries—15°, 20°, 25°, and a two-stage 15°+30° chamfer—and systematically evaluated their impact toughness, wear resistance, thermal stability, and residual stress through drop-weight impact, vertical-lathe turning, thermal expansion, and Raman spectroscopy. The results show that the impact resistance of the cutters improves markedly with increasing chamfer angle, reaching up to approximately 64% above the standard product, whereas the wear resistance deteriorates correspondingly; the chamfer exerts no obvious effect on the thermal stability. Raman analysis reveals that laser engraving converts the cutting-edge region from residual tensile stress (approximately +0.8 to +1.3 GPa) into compressive stress (approximately -1.9 to -2.1 GPa), which suppresses crack initiation and propagation. This work provides a practical basis for the selection of large chamfer angles and the structural optimization of PDC cutters for drilling.
Authors
- Houzhen Chen (ORCID: https://orcid.org/0000-0002-3229-9583)
- Jianghe Liao
- Qiang Chen
- Kaiyuan Xue
- Deng Fuming
- Xing Xiaotian
Institutions
- China University of Mining and Technology - Beijing (CN)
Publication Details
- Journal
- Fullerenes Nanotubes and Carbon Nanostructures
- Published
- 2026-11-17
- DOI
- https://doi.org/10.1080/1536383x.2026.2762067
- Primary Topic
- Advanced materials and composites
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- National Natural Science Foundation of China
- National Science and Technology Major Project