Microstructure and texture evolution in functionally graded AA6014 aluminium tubes processed by tube roller compression

Tube Roller Compression (TRC) was used to study the relationship between the through-thickness deformation gradient, the microstructural evolution, crystallographic texture and hardness of AA6014 aluminium alloy tubes. In the most highly strained areas, the average grain size was refined from about 19.5 μm in the annealed condition to 3–4 μm by the application of non-uniform strain due to TRC, highest at the outer surface and decreasing towards the inner wall. The higher the severity of processing, the more elongated the grains became and the more heterogeneous the microstructural organization. Analysis of {111} pole figures and orientation distribution functions at φ₂ = 45° indicated an initially weak texture, with Goss as the dominant pole figure with a minor Cube component, that evolved as a result of condition-dependent redistribution of the Copper, Brass, and Goss components. As a result of this evolution, local orientations with higher texture intensities or relatively diffuse orientation distributions were obtained depending on the processing parameters. Consistent with the microstructural gradient, the hardness increased from approximately 48–52 HV near the inner region to 58–70 HV at the outer surface, depending on the processing condition. Using an objective hardened threshold defined from the annealed condition (mean + 2SD, ~ 53 HV), the effective hardened-layer depth ranged from approximately 0.2 to 1.6 mm, while Sample 5 remained above the threshold throughout the measured depth (> 1.8 mm). Based on these results, a quantitative correlation between TRC-induced strain gradient, grain refinement, texture evolution and strengthening of the local material is established. TRC therefore offers a potential pathway to achieve functionally graded aluminium tube that is hard on the outside while retaining a comparatively less-deformed core.

Authors

Institutions

Publication Details

Journal
Scientific Reports
Published
2026-11-17
DOI
https://doi.org/10.1038/s41598-026-80535-9
Primary Topic
Microstructure and mechanical properties
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Microstructure and texture evolution in functionally graded AA6014 aluminium tubes processed by tube roller compression

Waleed H. El-Garaihy, Yasser Zedan, Abdulrahman I. Alateyah, Hussein Zein et al.
2 links
Scientific Reports
Microstructure and mechanical properties
article

Microstructure and texture evolution in functionally graded AA6014 aluminium tubes processed by tube roller compression

Waleed H. El-Garaihy, Yasser Zedan, Abdulrahman I. Alateyah, Hussein Zein, Eman M. Zayed, Nahed El-Mahallawy, Adel M. A. Mohamed
article en

Abstract

Tube Roller Compression (TRC) was used to study the relationship between the through-thickness deformation gradient, the microstructural evolution, crystallographic texture and hardness of AA6014 aluminium alloy tubes. In the most highly strained areas, the average grain size was refined from about 19.5 μm in the annealed condition to 3–4 μm by the application of non-uniform strain due to TRC, highest at the outer surface and decreasing towards the inner wall. The higher the severity of processing, the more elongated the grains became and the more heterogeneous the microstructural organization. Analysis of {111} pole figures and orientation distribution functions at φ₂ = 45° indicated an initially weak texture, with Goss as the dominant pole figure with a minor Cube component, that evolved as a result of condition-dependent redistribution of the Copper, Brass, and Goss components. As a result of this evolution, local orientations with higher texture intensities or relatively diffuse orientation distributions were obtained depending on the processing parameters. Consistent with the microstructural gradient, the hardness increased from approximately 48–52 HV near the inner region to 58–70 HV at the outer surface, depending on the processing condition. Using an objective hardened threshold defined from the annealed condition (mean + 2SD, ~ 53 HV), the effective hardened-layer depth ranged from approximately 0.2 to 1.6 mm, while Sample 5 remained above the threshold throughout the measured depth (> 1.8 mm). Based on these results, a quantitative correlation between TRC-induced strain gradient, grain refinement, texture evolution and strengthening of the local material is established. TRC therefore offers a potential pathway to achieve functionally graded aluminium tube that is hard on the outside while retaining a comparatively less-deformed core.

Scientific Reports
Ain Shams University (EG), Suez University (EG), British University in Egypt (EG), Qassim University (SA), Buraydah Colleges (SA), German University in Cairo (EG), École de Technologie Supérieure (CA)
Qassim University
Microstructure and mechanical properties
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon