PFC2D-Based Analysis of Pull-Out Response and Simulated Crack Evolution of Resin-Anchored Rock Bolts: Implications for Anchorage Design

The design of resin-anchored rock bolt systems requires an assessment of pull-out response and potential damage under different anchorage lengths and rock-strength conditions. This study investigates the pull-out response and simulated crack evolution of resin-anchored rock bolts through laboratory experiments and two-dimensional discrete element simulations. A PFC2D model comprising rock bolts, resin grout, and surrounding rock was established, with material parameters calibrated for three specimen-scale strength groups: hard rock, moderately hard rock, and soft rock. The experimental S120 specimen exhibited a peak pull-out load of 113 kN at a displacement of 10.8 mm. Comparison of the normalized experimental and numerical load–displacement curves showed similar overall loading and post-peak softening characteristics. The numerical results revealed differences in simulated crack development among the three material groups. Tensile cracks constituted the largest recorded crack category in the investigated hard-, moderately hard-, and soft-rock configurations, whereas tension–shear cracks constituted the largest category in several moderately hard- and soft-rock configurations. In the soft-rock simulations, aggregate crack counts exhibited non-monotonic variations with increasing anchorage length, with relatively low values observed at certain intermediate lengths. For the crack-count comparisons, three simulations with different random seeds were performed for each configuration to examine the influence of particle arrangement. These results characterize the responses of the investigated numerical configurations rather than statistically verified anchorage-length trends. The findings provide insights into load-transfer characteristics and simulated damage evolution in simplified resin-anchorage systems and may inform the preliminary comparison of anchorage configurations in engineering design. Their interpretation remains subject to the assumptions of the two-dimensional model and the limited number of numerical realizations.

Authors

Institutions

Publication Details

Journal
Designs
Published
2026-11-17
DOI
https://doi.org/10.3390/designs10060134
Primary Topic
Rock Mechanics and Modeling
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

PFC2D-Based Analysis of Pull-Out Response and Simulated Crack Evolution of Resin-Anchored Rock Bolts: Implications for Anchorage Design

Baoqun Wang, Chaoqun Sun, Lu Zhang, Youkai Li et al.
3 links
Designs
Rock Mechanics and Modeling
article

PFC2D-Based Analysis of Pull-Out Response and Simulated Crack Evolution of Resin-Anchored Rock Bolts: Implications for Anchorage Design

Baoqun Wang, Chaoqun Sun, Lu Zhang, Youkai Li, Jiazheng Ji, Chengyong Chen, Changjing Xu, Ziqi Ge
article en

Abstract

The design of resin-anchored rock bolt systems requires an assessment of pull-out response and potential damage under different anchorage lengths and rock-strength conditions. This study investigates the pull-out response and simulated crack evolution of resin-anchored rock bolts through laboratory experiments and two-dimensional discrete element simulations. A PFC2D model comprising rock bolts, resin grout, and surrounding rock was established, with material parameters calibrated for three specimen-scale strength groups: hard rock, moderately hard rock, and soft rock. The experimental S120 specimen exhibited a peak pull-out load of 113 kN at a displacement of 10.8 mm. Comparison of the normalized experimental and numerical load–displacement curves showed similar overall loading and post-peak softening characteristics. The numerical results revealed differences in simulated crack development among the three material groups. Tensile cracks constituted the largest recorded crack category in the investigated hard-, moderately hard-, and soft-rock configurations, whereas tension–shear cracks constituted the largest category in several moderately hard- and soft-rock configurations. In the soft-rock simulations, aggregate crack counts exhibited non-monotonic variations with increasing anchorage length, with relatively low values observed at certain intermediate lengths. For the crack-count comparisons, three simulations with different random seeds were performed for each configuration to examine the influence of particle arrangement. These results characterize the responses of the investigated numerical configurations rather than statistically verified anchorage-length trends. The findings provide insights into load-transfer characteristics and simulated damage evolution in simplified resin-anchorage systems and may inform the preliminary comparison of anchorage configurations in engineering design. Their interpretation remains subject to the assumptions of the two-dimensional model and the limited number of numerical realizations.

DesignsVol. 10(6)
Shandong Jiaotong University (CN)
Rock Mechanics and Modeling
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon