Seismic behavior and design of sea-sand concrete shear walls with steel-FRP composite bars and GFRP reinforcement

Sea-sand concrete offers clear sustainability benefits for coastal construction, but its adoption in seismic‑resistant structures is constrained by the chloride-induced corrosion of conventional steel reinforcement. This paper deals with the seismic behavior and design of sea-sand concrete shear walls reinforced with longitudinal steel-FRP composite bars (SFCBs) and transverse GFRP reinforcement. A three-dimensional nonlinear finite-element (FE) model is developed in Abaqus to simulate the seismic responses of sea-sand concrete shear walls with composite bars and is validated against quasi-static cyclic test results. The seismic behavior of shear walls with varying design parameters is investigated using the FE model. The parameters examined include the axial compression ratio, stirrup spacing, boundary-element longitudinal reinforcement ratio, concrete compressive strength, steel‑to‑fiber ratio of SFCBs, and shear-span ratio. A sectional method is used to derive design formulas to evaluate the moment capacity of the wall system based on plastic analysis and observed failure mechanisms. It is shown that the developed FE model accurately predicts the experimentally measured seismic responses of shear walls with composite bars. The proposed sectional method yields peak-resistance predictions that are in good agreement with the available experimental and numerical results, while exhibiting a slight conservative tendency. The numerical results presented provide important insight into the seismic behavior of sea-sand concrete shear walls incorporating composite bars. The proposed FE model and sectional method can be used for the short-term seismic assessment and design of sea-sand concrete shear walls reinforced with SFCBs and GFRP bars.

Authors

Institutions

Publication Details

Journal
Structures
Published
2026-11-18
DOI
https://doi.org/10.1016/j.istruc.2026.113540
Primary Topic
Structural Behavior of Reinforced Concrete
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Seismic behavior and design of sea-sand concrete shear walls with steel-FRP composite bars and GFRP reinforcement

Vipulkumar Ishvarbhai Patel, Qing Quan Liang, Minsheng Guan, Mizan Ahmed et al.
4 links
Structures
Structural Behavior of Reinforced Concrete
article

Seismic behavior and design of sea-sand concrete shear walls with steel-FRP composite bars and GFRP reinforcement

Vipulkumar Ishvarbhai Patel, Qing Quan Liang, Minsheng Guan, Mizan Ahmed, Siying Lin, Bangyu Li, Der-Shen Yang, Tihua Zhang
article en

Abstract

Sea-sand concrete offers clear sustainability benefits for coastal construction, but its adoption in seismic‑resistant structures is constrained by the chloride-induced corrosion of conventional steel reinforcement. This paper deals with the seismic behavior and design of sea-sand concrete shear walls reinforced with longitudinal steel-FRP composite bars (SFCBs) and transverse GFRP reinforcement. A three-dimensional nonlinear finite-element (FE) model is developed in Abaqus to simulate the seismic responses of sea-sand concrete shear walls with composite bars and is validated against quasi-static cyclic test results. The seismic behavior of shear walls with varying design parameters is investigated using the FE model. The parameters examined include the axial compression ratio, stirrup spacing, boundary-element longitudinal reinforcement ratio, concrete compressive strength, steel‑to‑fiber ratio of SFCBs, and shear-span ratio. A sectional method is used to derive design formulas to evaluate the moment capacity of the wall system based on plastic analysis and observed failure mechanisms. It is shown that the developed FE model accurately predicts the experimentally measured seismic responses of shear walls with composite bars. The proposed sectional method yields peak-resistance predictions that are in good agreement with the available experimental and numerical results, while exhibiting a slight conservative tendency. The numerical results presented provide important insight into the seismic behavior of sea-sand concrete shear walls incorporating composite bars. The proposed FE model and sectional method can be used for the short-term seismic assessment and design of sea-sand concrete shear walls reinforced with SFCBs and GFRP bars.

StructuresVol. 94
Tongji University (CN), Shenzhen University (CN), La Trobe University (AU), Curtin University (AU), China Construction Eighth Engineering Division (China) (CN), Victoria University (AU)
National Natural Science Foundation of China
Industry, innovation and infrastructure
Structural Behavior of Reinforced Concrete
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon