Modeling of humid-air condensation below the water triple point: A comparison of Euler–Euler and Euler–Lagrange approaches in nozzles and parallel-jet mixing layers

Accurate prediction of non-equilibrium condensation in humid-air flows remains challenging due to uncertainties in nucleation, droplet-growth modeling, and the representation of the dispersed phase. This study compares different droplet-growth formulations within Euler–monodisperse (E–M), Euler–polydisperse (E–P), and Euler–Lagrange (E–L) frameworks in ANSYS Fluent. The models are first assessed against experimental data from transonic humid-air nozzle flows covering different pressure ratios and inlet humidities. Particular attention is given to condensation below the triple point of water. The combined use of the saturation pressure of supercooled liquid water and a curvature-dependent Tolman correction of the surface tension substantially improves the prediction of nucleation onset and the corresponding pressure rise. In the nozzle cases, E–P and E–L provide similar condensation behavior, whereas E–M predicts larger characteristic droplet sizes. The validated approaches are subsequently applied to a two-dimensional mixing layer formed by two parallel streams. In this configuration, differences between the multiphase formulations become more pronounced, demonstrating the increasing importance of resolving the evolving droplet-size distribution. The time-scale analysis further shows that the limiting mechanism depends on the thermodynamic conditions: at lower relative humidity, phase relaxation predominantly limits the condensation process, whereas at higher humidity the process becomes increasingly controlled by mixing. The employed droplet-growth formulation also affects the resulting droplet-size distributions, with transitional Knudsen-number effects becoming increasingly relevant during subsequent droplet growth. Overall, the results demonstrate that a polydisperse representation of the droplet population is important for condensation in mixing flows and that the interaction between phase-transition and mixing time scales determines the local condensation behavior.

Authors

Institutions

Publication Details

Journal
International Journal of Heat and Fluid Flow
Published
2026-11-17
DOI
https://doi.org/10.1016/j.ijheatfluidflow.2026.110782
Primary Topic
Particle Dynamics in Fluid Flows
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Modeling of humid-air condensation below the water triple point: A comparison of Euler–Euler and Euler–Lagrange approaches in nozzles and parallel-jet mixing layers

Tim Wittmann, Christoph Bode, Christoph Grigo
1 links
International Journal of Heat and Fluid Flow
Particle Dynamics in Fluid Flows
article

Modeling of humid-air condensation below the water triple point: A comparison of Euler–Euler and Euler–Lagrange approaches in nozzles and parallel-jet mixing layers

Tim Wittmann, Christoph Bode, Christoph Grigo
article en

Abstract

Accurate prediction of non-equilibrium condensation in humid-air flows remains challenging due to uncertainties in nucleation, droplet-growth modeling, and the representation of the dispersed phase. This study compares different droplet-growth formulations within Euler–monodisperse (E–M), Euler–polydisperse (E–P), and Euler–Lagrange (E–L) frameworks in ANSYS Fluent. The models are first assessed against experimental data from transonic humid-air nozzle flows covering different pressure ratios and inlet humidities. Particular attention is given to condensation below the triple point of water. The combined use of the saturation pressure of supercooled liquid water and a curvature-dependent Tolman correction of the surface tension substantially improves the prediction of nucleation onset and the corresponding pressure rise. In the nozzle cases, E–P and E–L provide similar condensation behavior, whereas E–M predicts larger characteristic droplet sizes. The validated approaches are subsequently applied to a two-dimensional mixing layer formed by two parallel streams. In this configuration, differences between the multiphase formulations become more pronounced, demonstrating the increasing importance of resolving the evolving droplet-size distribution. The time-scale analysis further shows that the limiting mechanism depends on the thermodynamic conditions: at lower relative humidity, phase relaxation predominantly limits the condensation process, whereas at higher humidity the process becomes increasingly controlled by mixing. The employed droplet-growth formulation also affects the resulting droplet-size distributions, with transitional Knudsen-number effects becoming increasingly relevant during subsequent droplet growth. Overall, the results demonstrate that a polydisperse representation of the droplet population is important for condensation in mixing flows and that the interaction between phase-transition and mixing time scales determines the local condensation behavior.

International Journal of Heat and Fluid FlowVol. 122
Airbus (Germany) (DE), Technische Universität Braunschweig (DE)
European Commission
Particle Dynamics in Fluid Flows
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon