Performance improvement of Cd-free CIGS Solar Cells Using ZnS Buffer Layers Prepared by Solvothermal Routes: Experimental and Device Simulation

Abstract In this work, we investigate the synthesis and characterization of the ZnS layer as an alternative Cd-free buffer layer for Cu(In,Ga)Se 2 (CIGS) thin film solar cells, The ZnS nanopowders were successfully prepared via solvothermal method, then employed to fabricate thin films deposited by rf-magnetron sputtering. Their structural, morphological and optical characterizations were performed. In addition, these experimental data obtained were further implemented in numerical simulations of a p-CIGS/n-ZnS heterojunction using SCAPS-1D. The impact of different buffer layer materials CdS and ZnS on the performance of CIGS solar cells was thoroughly compared and analyzed. The obtained results demonstrate that, the films crystallize in the cubic phase with grain sizes ranging from 4 to 20 nm and exhibiting high transparency (> 90%), with a tunable band gap in the range of 3.68 to 3.8 eV. The tuning of the deposition conditions allows ZnS to achieve proper band alignment with the CIGS absorber. The optimized structure revealed that, both the buffer material and their thickness significantly influence the overall device performance. The substitution of the conventional CdS buffer with ZnS this possesses a wider bandgap, resulted in lower conversion efficiency due to unfavorable energy band alignment at the interface. To overcome this limitation and enhance short-wavelength absorption, a novel CdS/ZnS double buffer layer structure was proposed. The optimization of this configuration improved the cell efficiency from 22.62% to 24.68%. These results indicate the potential of ZnS-based buffers as promising and environmentally friendly alternatives for high efficiency CIGS solar cells.

Authors

Institutions

Publication Details

Journal
Research Square
Published
2026-11-16
DOI
https://doi.org/10.21203/rs.3.rs-11495025/v1
Primary Topic
Chalcogenide Semiconductor Thin Films
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Performance improvement of Cd-free CIGS Solar Cells Using ZnS Buffer Layers Prepared by Solvothermal Routes: Experimental and Device Simulation

Wahiba Chatta, Abdelhafid Mouhoub, Mouhoub Birane
3 links
Research Square
Chalcogenide Semiconductor Thin Films
preprint

Performance improvement of Cd-free CIGS Solar Cells Using ZnS Buffer Layers Prepared by Solvothermal Routes: Experimental and Device Simulation

Wahiba Chatta, Abdelhafid Mouhoub, Mouhoub Birane
preprint en

Abstract

Abstract In this work, we investigate the synthesis and characterization of the ZnS layer as an alternative Cd-free buffer layer for Cu(In,Ga)Se 2 (CIGS) thin film solar cells, The ZnS nanopowders were successfully prepared via solvothermal method, then employed to fabricate thin films deposited by rf-magnetron sputtering. Their structural, morphological and optical characterizations were performed. In addition, these experimental data obtained were further implemented in numerical simulations of a p-CIGS/n-ZnS heterojunction using SCAPS-1D. The impact of different buffer layer materials CdS and ZnS on the performance of CIGS solar cells was thoroughly compared and analyzed. The obtained results demonstrate that, the films crystallize in the cubic phase with grain sizes ranging from 4 to 20 nm and exhibiting high transparency (> 90%), with a tunable band gap in the range of 3.68 to 3.8 eV. The tuning of the deposition conditions allows ZnS to achieve proper band alignment with the CIGS absorber. The optimized structure revealed that, both the buffer material and their thickness significantly influence the overall device performance. The substitution of the conventional CdS buffer with ZnS this possesses a wider bandgap, resulted in lower conversion efficiency due to unfavorable energy band alignment at the interface. To overcome this limitation and enhance short-wavelength absorption, a novel CdS/ZnS double buffer layer structure was proposed. The optimization of this configuration improved the cell efficiency from 22.62% to 24.68%. These results indicate the potential of ZnS-based buffers as promising and environmentally friendly alternatives for high efficiency CIGS solar cells.

Research Square
Amar Telidji University of Laghouat (DZ)
Affordable and clean energy
Chalcogenide Semiconductor Thin Films
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon