Characterizing autothermal reformer operating conditions for inline integration with a solid oxide fuel cell stack

High-power density solid oxide fuel cell (SOFC) systems running on hydrocarbon fuels warrant compact upstream fuel reforming and reactant preheating to minimize system size and startup time. To that end, this work investigates a CH 4 -fueled autothermal reformer/heat exchanger (ATR/HX) designed for inline integration directly upstream of an SOFC stack, where mildly exothermic catalytic oxidative reforming simultaneously drives H 2 production for the SOFC anode and air preheating for the SOFC cathode. A quasi-1D ATR/HX model with detailed reforming chemistry guides reactor sizing and selection of operating conditions for controlled partial reforming and effective thermal integration. Modeling results indicate that an in-line reactor length of 3.6 cm sufficiently preheats the anode and cathode streams from 400 ∘ C to 550 -- 650 ∘ C with a cathode air outlet approach temperature of < 30 ∘ C to support high-power-density performance for SOFC cells with thin-film yttria-stabilized zirconia (YSZ) or gadolinium-doped ceria (GDC) electrolytes. Experiments at atmospheric pressure demonstrate stable ATR light-off ≤ 450 ∘ C in a single-cell configuration and near 400 ∘ C in a 3-cell short-stack configuration. These experiments characterize the ATR/HX subsystem in SOFC-relevant hardware but do not constitute validation with an electrochemically active SOFC stack. The model and experimental tests show that the compact ATR/HX operates under residence-time-limited conditions, enabling efficient thermal conditioning while preserving residual CH 4 for downstream internal reforming within the SOFC anode. These results demonstrate the feasibility of compact inline ATR/HX integration and establish operating guidelines for subsequent thermally integrated SOFC systems with reduced startup time and improved system compactness.

Authors

Institutions

Publication Details

Journal
Applied Energy
Published
2026-11-16
DOI
https://doi.org/10.1016/j.apenergy.2026.129276
Primary Topic
Advancements in Solid Oxide Fuel Cells
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Characterizing autothermal reformer operating conditions for inline integration with a solid oxide fuel cell stack

Gregory S. Jackson, Robert J. Braun, Cyrus Boushehri, Lucas M. Pratt et al.
Applied Energy
Advancements in Solid Oxide Fuel Cells
article

Characterizing autothermal reformer operating conditions for inline integration with a solid oxide fuel cell stack

Gregory S. Jackson, Robert J. Braun, Cyrus Boushehri, Lucas M. Pratt, Tyrone L. Vincent, Akhil Ashar, Christopher P Cadou, Fuqiong Lei, Yifan Gu
article en

Abstract

High-power density solid oxide fuel cell (SOFC) systems running on hydrocarbon fuels warrant compact upstream fuel reforming and reactant preheating to minimize system size and startup time. To that end, this work investigates a CH 4 -fueled autothermal reformer/heat exchanger (ATR/HX) designed for inline integration directly upstream of an SOFC stack, where mildly exothermic catalytic oxidative reforming simultaneously drives H 2 production for the SOFC anode and air preheating for the SOFC cathode. A quasi-1D ATR/HX model with detailed reforming chemistry guides reactor sizing and selection of operating conditions for controlled partial reforming and effective thermal integration. Modeling results indicate that an in-line reactor length of 3.6 cm sufficiently preheats the anode and cathode streams from 400 ∘ C to 550 -- 650 ∘ C with a cathode air outlet approach temperature of < 30 ∘ C to support high-power-density performance for SOFC cells with thin-film yttria-stabilized zirconia (YSZ) or gadolinium-doped ceria (GDC) electrolytes. Experiments at atmospheric pressure demonstrate stable ATR light-off ≤ 450 ∘ C in a single-cell configuration and near 400 ∘ C in a 3-cell short-stack configuration. These experiments characterize the ATR/HX subsystem in SOFC-relevant hardware but do not constitute validation with an electrochemically active SOFC stack. The model and experimental tests show that the compact ATR/HX operates under residence-time-limited conditions, enabling efficient thermal conditioning while preserving residual CH 4 for downstream internal reforming within the SOFC anode. These results demonstrate the feasibility of compact inline ATR/HX integration and establish operating guidelines for subsequent thermally integrated SOFC systems with reduced startup time and improved system compactness.

Applied EnergyVol. 427
Colorado School of Mines (US), University of Maryland, College Park (US)
U.S. Department of Energy, Advanced Research Projects Agency - Energy, Advanced Research Projects Agency
Affordable and clean energy, Industry, innovation and infrastructure
Advancements in Solid Oxide Fuel Cells
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon