Machine-Learning-Assisted Multi-objective Screening of Hardness and Oxidation Resistance in Refractory High-Entropy Alloys
Abstract Refractory high-entropy alloys (RHEAs) exhibit excellent mechanical strength and thermal stability, but their practical application is frequently limited by insufficient oxidation resistance. This study develops a machine-learning-assisted workflow for multi-objective screening of hardness and isothermal oxidation resistance in RHEAs. The selected baseline hardness XGBoost model and baseline oxidation random forest model achieve held-out R 2 values of 0.79 and 0.76, respectively. The current fitted models screen 109,571 quinary compositions and are compared with six alloys fabricated following an initial ML-assisted multi-objective selection targeting contrasting hardness–oxidation trade-offs. Among these alloys, HHHO_2 exhibits the highest measured hardness of 780 ± 8 HV, whereas LHHO_1 exhibits the lowest specific mass gain of 2.75 ± 0.04 mg/cm 2 , corresponding to an oxidation-resistance index I ox of − 0.44 after oxidation at 1000 °C for 20 h. The comparatively large oxidation-prediction errors motivate development of a time-resolved oxidation model incorporating oxidation duration and a composition-weighted Pilling–Bedworth ratio. Within the complete feature set, gradient boosting achieves a five-fold cross-validation R 2 of 0.92 ± 0.02 and a held-out R 2 of 0.94. For three further alloys selected using the initial advanced-model predictions, the advanced model reduces the mean absolute I ox prediction error from 0.46 to 0.21, representing an approximately 53% reduction relative to the baseline oxidation model. The refined HHHO candidate exhibits a hardness of 661 ± 11 HV and a specific mass gain of 6.20 ± 0.01 mg/cm 2 . Repeated out-of-fold SHAP and cross-model ranking analyses are used to assess the robustness of the learned associations, while multivariate applicability-domain analysis identifies candidates requiring extrapolative interpretation. Overall, the workflow provides an experimentally informed approach for prioritizing RHEA compositions with different hardness–oxidation trade-offs while explicitly accounting for model variability and compositional applicability.
Authors
- Stéphane Gorsse (ORCID: https://orcid.org/0000-0003-1966-8476)
- An‐Chou Yeh (ORCID: https://orcid.org/0000-0002-9460-8345)
- Wei-Chih Lin (ORCID: https://orcid.org/0000-0002-0143-1174)
Institutions
- Centre National de la Recherche Scientifique (FR)
- Nanyang Technological University (SG)
- National Tsing Hua University (TW)
- Institut de Chimie de la Matière Condensée de Bordeaux (FR)
- Institut Polytechnique de Bordeaux (FR)
- CNRS-International-NTU-Thales Research Alliance (SG)
Publication Details
- Journal
- High Entropy Alloys & Materials
- Published
- 2026-11-16
- DOI
- https://doi.org/10.1007/s44210-026-00087-5
- Primary Topic
- High Entropy Alloys Studies
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- National Tsing Hua University