Skeleton‐Filled Micropillar‐Array Photothermal Surfaces for Durable Passive and Active Anti‐/De‐Icing
Mechanically durable photothermal icephobic surfaces remain challenging to develop because mechanical abrasion can degrade both water-repellent microstructures and photothermal functionality. Herein, we report a skeleton-filled micropillar-array photothermal surface (SMPS) fabricated by vacuum impregnation of a porous copper skeleton with a photothermal MWCNT/PDMS composite, followed by femtosecond laser micromachining. The resulting SMPS architecture features recessed micropillar arrays surrounded by a raised porous copper skeleton, which is designed to bear mechanical contact and protect the functional microstructures. The optimized SMPS exhibits a water contact angle of ∼163°, a sliding angle of ∼2°, and a solar absorptance of 93.3%. Under the specified freezing-test conditions, the freezing time reaches 2177 s. Compared with a non-skeleton micropillar-array photothermal surface (NMPS), SMPS better retains its microstructure and water-repellent behavior after the prescribed mechanical-abrasion treatment. Under one-sun illumination, its steady-state temperature decreases from 43.4°C to 40.1°C after 30 abrasion cycles, whereas that of NMPS decreases from 50.2°C to 42.1°C, indicating better retention of photothermal response. These findings demonstrate an architectural approach to preserving complementary passive ice-mitigation and solar-driven de-icing functions after mechanical damage. Application-oriented tests on bare and insulated cables further demonstrate its compatibility with curved substrates.
Authors
- Senyun Liu (ORCID: https://orcid.org/0009-0001-7426-3079)
- Jiaxin Yu (ORCID: https://orcid.org/0000-0003-3578-5760)
- Yizhou Shen (ORCID: https://orcid.org/0000-0001-8777-5383)
- Guoqiang Li (ORCID: https://orcid.org/0000-0001-8161-2065)
- Zehua Xu (ORCID: https://orcid.org/0000-0001-5708-4709)
- Zehang Cui (ORCID: https://orcid.org/0000-0002-1387-6840)
- Dongxu Xiao
- Yiyu Chen
- Haojie Xu
- Yuan Wang
- Yang Li
Institutions
- Southwest University of Science and Technology (CN)
- China Aerodynamics Research and Development Center (CN)
- Civil Aviation Flight University of China (CN)
- Nanjing University of Aeronautics and Astronautics (CN)
Publication Details
- Journal
- Small
- Published
- 2026-11-16
- DOI
- https://doi.org/10.1002/smll.76747
- Primary Topic
- Icing and De-icing Technologies
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- National Key Research and Development Program of China