Comparative experimental and theoretical study on gamma-ray shielding efficiency of barite powder and steel powder cement mortar

High-density mortar coatings are increasingly used to shield medical and industrial radiation facilities. Ten cement mortars were prepared at water-to-cement ratio 0.60, with fine aggregate partially replaced by barite powder, steel powder, or both at 10, 20 and 30 wt.%. Density, 28-day compressive strength and the linear attenuation coefficient were determined, the latter in narrow-beam geometry with a NaI(Tl) detector using 133Ba, 137Cs and 60Co at 0.356, 0.662, 1.173 and 1.332 MeV, and compared with WinXCom. All modified mortars were denser (2.06–2.29 versus 2.01 g/cm3) and stronger than the control. Best shielding came from 30% barite powder and from 20% barite powder with 10% steel powder, giving μ of 0.244 and 0.241 cm−1 at 0.356 MeV, statistically indistinguishable. The latter also gave the highest strength, 58% above the control, and reduced the half-value layer by 14.9% at 0.356 MeV. μ correlated strongly with density (R2 = 0.937–0.998), most weakly at 0.356 MeV where the high atomic number of barium enhances photoelectric absorption. WinXCom overestimated μ by 3.08 to 10.75%, the deviation reflecting entrapped air, not cross-section error. Combining both powders therefore matches the shielding of higher single-additive dosages at lower heavy-aggregate content while improving strength.

Authors

Institutions

Publication Details

Journal
Journal of Asian Architecture and Building Engineering
Published
2026-11-16
DOI
https://doi.org/10.1080/13467581.2026.2765139
Primary Topic
Radiation Shielding Materials Analysis
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Comparative experimental and theoretical study on gamma-ray shielding efficiency of barite powder and steel powder cement mortar

Phongthorn Julphunthong, Wuttichai Chaiphaksa, Ausanai Prapan, Jakrapong Kaewkhao et al.
Journal of Asian Architecture and Building Engineering
Radiation Shielding Materials Analysis
article

Comparative experimental and theoretical study on gamma-ray shielding efficiency of barite powder and steel powder cement mortar

Phongthorn Julphunthong, Wuttichai Chaiphaksa, Ausanai Prapan, Jakrapong Kaewkhao, Punyawit Tunin, Kitsana Kanthawong, Janejira Kengkla
article en

Abstract

High-density mortar coatings are increasingly used to shield medical and industrial radiation facilities. Ten cement mortars were prepared at water-to-cement ratio 0.60, with fine aggregate partially replaced by barite powder, steel powder, or both at 10, 20 and 30 wt.%. Density, 28-day compressive strength and the linear attenuation coefficient were determined, the latter in narrow-beam geometry with a NaI(Tl) detector using 133Ba, 137Cs and 60Co at 0.356, 0.662, 1.173 and 1.332 MeV, and compared with WinXCom. All modified mortars were denser (2.06–2.29 versus 2.01 g/cm3) and stronger than the control. Best shielding came from 30% barite powder and from 20% barite powder with 10% steel powder, giving μ of 0.244 and 0.241 cm−1 at 0.356 MeV, statistically indistinguishable. The latter also gave the highest strength, 58% above the control, and reduced the half-value layer by 14.9% at 0.356 MeV. μ correlated strongly with density (R2 = 0.937–0.998), most weakly at 0.356 MeV where the high atomic number of barium enhances photoelectric absorption. WinXCom overestimated μ by 3.08 to 10.75%, the deviation reflecting entrapped air, not cross-section error. Combining both powders therefore matches the shielding of higher single-additive dosages at lower heavy-aggregate content while improving strength.

Journal of Asian Architecture and Building Engineering
Nakhon Pathom Rajabhat University (TH), Naresuan University (TH)
Naresuan University
Radiation Shielding Materials Analysis
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon