Effect of Superplasticizer Type on Transport Properties and Chemical Resistance of Ternary One-Part Geopolymer Mortars

Abstract The growing demand for durable and sustainable construction materials has intensified research on alkali-activated binders as low-carbon alternatives to portland cement. One-part geopolymers offer practical advantages for field application; however, their long-term durability is strongly influenced by admixture compatibility, particularly superplasticizers, which can alter pore structure and chemical stability. This study investigates the influence of sulfonated naphthalene formaldehyde (SNF) and polycarboxylate ether (PCE) superplasticizers on the durability of a ternary one-part geopolymer system formulated from ground granulated blast-furnace slag, diatomite, and feldspar. Three mortar mixes were prepared: M1-N (1% SNF), M2-P (1% PCE), and M3-C (control without superplasticizer). Durability performance was assessed through acid resistance, sulfate resistance, water absorption, rapid chloride permeability test (RCPT), rapid chloride migration test (RCMT), and oxygen permeability. Microstructural analyses were conducted through X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). The SNF-modified mix exhibited the lowest water absorption (3.39%), lowest RCPT charge passed (970 C), and the lowest chloride migration coefficient ( 2.65 × 10 – 12 m 2 / s ), indicating a refined and less connected pore structure. It also achieved the highest oxygen permeability index (9.51), representing an improvement of approximately 11% and 20% compared with the control and PCE-modified mixes, respectively. Under sulfuric acid exposure, the SNF-modified system showed the lowest mass loss after 180 days (1.39%) and the highest residual compressive strength, retaining about 48% of its unexposed 28-day strength, compared with 44% for the PCE-modified mix and 41% for the control. Acid exposure caused more severe deterioration than sulfate attack across all mixes, although the SNF-modified system demonstrated significantly better resistance in both conditions. XRD and FTIR analyses revealed reduced amorphous gel dissolution and limited secondary salt formation in SNF mixes, consistent with SEM observations of a compact matrix. Overall, SNF at 1% by binder mass significantly improved the durability of one-part geopolymer mortars, highlighting the critical role of superplasticizer selection in designing durable alkali-activated materials.

Authors

Institutions

Publication Details

Journal
Journal of structural design and construction practice.
Published
2026-11-16
DOI
https://doi.org/10.1061/jsdccc.sceng-2257
Primary Topic
Concrete and Cement Materials Research
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effect of Superplasticizer Type on Transport Properties and Chemical Resistance of Ternary One-Part Geopolymer Mortars

E.S. Poojalakshmi, Praveen Nagarajan, Blessen Skariah Thomas, Sudha Das et al.
2 links
Journal of structural design and construction practice.
Concrete and Cement Materials Research
article

Effect of Superplasticizer Type on Transport Properties and Chemical Resistance of Ternary One-Part Geopolymer Mortars

E.S. Poojalakshmi, Praveen Nagarajan, Blessen Skariah Thomas, Sudha Das, J. Sudhakumar
article en

Abstract

Abstract The growing demand for durable and sustainable construction materials has intensified research on alkali-activated binders as low-carbon alternatives to portland cement. One-part geopolymers offer practical advantages for field application; however, their long-term durability is strongly influenced by admixture compatibility, particularly superplasticizers, which can alter pore structure and chemical stability. This study investigates the influence of sulfonated naphthalene formaldehyde (SNF) and polycarboxylate ether (PCE) superplasticizers on the durability of a ternary one-part geopolymer system formulated from ground granulated blast-furnace slag, diatomite, and feldspar. Three mortar mixes were prepared: M1-N (1% SNF), M2-P (1% PCE), and M3-C (control without superplasticizer). Durability performance was assessed through acid resistance, sulfate resistance, water absorption, rapid chloride permeability test (RCPT), rapid chloride migration test (RCMT), and oxygen permeability. Microstructural analyses were conducted through X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). The SNF-modified mix exhibited the lowest water absorption (3.39%), lowest RCPT charge passed (970 C), and the lowest chloride migration coefficient ( 2.65 × 10 – 12 m 2 / s ), indicating a refined and less connected pore structure. It also achieved the highest oxygen permeability index (9.51), representing an improvement of approximately 11% and 20% compared with the control and PCE-modified mixes, respectively. Under sulfuric acid exposure, the SNF-modified system showed the lowest mass loss after 180 days (1.39%) and the highest residual compressive strength, retaining about 48% of its unexposed 28-day strength, compared with 44% for the PCE-modified mix and 41% for the control. Acid exposure caused more severe deterioration than sulfate attack across all mixes, although the SNF-modified system demonstrated significantly better resistance in both conditions. XRD and FTIR analyses revealed reduced amorphous gel dissolution and limited secondary salt formation in SNF mixes, consistent with SEM observations of a compact matrix. Overall, SNF at 1% by binder mass significantly improved the durability of one-part geopolymer mortars, highlighting the critical role of superplasticizer selection in designing durable alkali-activated materials.

Journal of structural design and construction practice.Vol. 32(2)
National Institute of Technology Calicut (IN)
Concrete and Cement Materials Research
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon