Scanning Electron Microscopy Texture Analysis of Brass, Aluminum and Mild Steel Worn Under Waste Cooking Oil Lubrication

In bio-lubricant research, worn surfaces are usually interpreted qualitatively from scanning electron microscopy (SEM). This study tested how much tribological information objective, brightness-invariant texture descriptors can recover from an archive of such micrographs. Fifty-two ×1000 fields of brass, aluminum and mild steel worn against stainless steel at 40 N under fully synthetic oil and a 50/50 blend with waste cooking oil (WCO) at 22, 40 and 80 °C, plus four unworn references, were described by ten orientation, correlation-length, spectral and feature descriptors. Each condition is one specimen, so fields are repeated measurements; the analysis is descriptive at field level and inferential only at specimen level (13 specimens). Aluminum surfaces were less directional than brass and mild steel (orientation order 0.71 against 0.96 and 0.91), but a similar difference existed before wear, and at specimen level it was not significant (p = 0.09). Mild steel at 80 °C was strongly grooved (anisotropy 21 against 1.7 at 40 °C), with a fifteen-fold rise in measured roughness. Replacing half the synthetic oil with WCO left no detectable signature, and none of the 30 descriptor–response correlations were significant. Operator-selected single SEM fields document gross morphology but cannot rank lubricants or infer wear rate; an imaging protocol is proposed.

Authors

Institutions

Publication Details

Journal
Lubricants
Published
2026-11-16
DOI
https://doi.org/10.3390/lubricants14110435
Primary Topic
Lubricants and Their Additives
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Scanning Electron Microscopy Texture Analysis of Brass, Aluminum and Mild Steel Worn Under Waste Cooking Oil Lubrication

Kumaran Kadirgama, Jasem Ghanem Alotaibi, Anthony Chukwunonso Opia, Ayedh Eid Alajmi et al.
Lubricants
Lubricants and Their Additives
article

Scanning Electron Microscopy Texture Analysis of Brass, Aluminum and Mild Steel Worn Under Waste Cooking Oil Lubrication

Kumaran Kadirgama, Jasem Ghanem Alotaibi, Anthony Chukwunonso Opia, Ayedh Eid Alajmi, Belal F. Yousif
article en

Abstract

In bio-lubricant research, worn surfaces are usually interpreted qualitatively from scanning electron microscopy (SEM). This study tested how much tribological information objective, brightness-invariant texture descriptors can recover from an archive of such micrographs. Fifty-two ×1000 fields of brass, aluminum and mild steel worn against stainless steel at 40 N under fully synthetic oil and a 50/50 blend with waste cooking oil (WCO) at 22, 40 and 80 °C, plus four unworn references, were described by ten orientation, correlation-length, spectral and feature descriptors. Each condition is one specimen, so fields are repeated measurements; the analysis is descriptive at field level and inferential only at specimen level (13 specimens). Aluminum surfaces were less directional than brass and mild steel (orientation order 0.71 against 0.96 and 0.91), but a similar difference existed before wear, and at specimen level it was not significant (p = 0.09). Mild steel at 80 °C was strongly grooved (anisotropy 21 against 1.7 at 40 °C), with a fifteen-fold rise in measured roughness. Replacing half the synthetic oil with WCO left no detectable signature, and none of the 30 descriptor–response correlations were significant. Operator-selected single SEM fields document gross morphology but cannot rank lubricants or infer wear rate; an imaging protocol is proposed.

LubricantsVol. 14(11)
Universiti Malaysia Pahang Al-Sultan Abdullah (MY), Public Authority for Applied Education and Training (KW), University of Southern Queensland (AU)
Lubricants and Their Additives
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon