Architected metamaterials fabricated by 3D printing for enhanced compression strength and energy dissipation

This study investigates the effect of arc count, the number of Schwarz Primitive (P) unit cells distributed around the circumference, on the mechanical response and energy absorption of hollow cylindrical TPMS structures. Five configurations (3, 5, 7, 9, and 11 arcs) were analyzed by finite element analysis, and the Arc 3 configuration was validated experimentally. Increasing the arc count from 3–11 raised the relative density from 0.196 to 0.268, the stiffness by 91.6%, and the effective modulus by 92.5%. The normalized modulus reached 54% to 75% of the axial upper bound, indicating predominantly axial load carrying with an efficiency that rose with arc count, and an empirical power law gave an exponent of 2.12 (R 2 = 0.993). All configurations entered the hardening region at 3.7–3.8% strain and showed no softening up to 13.25% strain. Specific energy absorption (SEA) rose by approximately 97.9% and toughness from 166 to 300 J/m 3 , with diminishing gains at higher arc counts. The force-response indicators, however, were non-monotonic: Arc 7 exhibited the highest behavior factor (1.16) and the lowest crush force efficiency (0.86), whereas Arc 3 showed the lowest behavior factor (1.07) and the highest crush force efficiency (0.93). The experimental response agreed with the simulation within 1% in force and stress at 5 mm and within 3.5% and 8.5% in SEA and toughness, respectively. Arc count is therefore an effective design variable for tailoring the stiffness and energy absorption of Schwarz-P cylinders, although gains in energy absorption and crushing-force uniformity do not necessarily occur together.

Authors

Institutions

Publication Details

Journal
Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications
Published
2026-11-16
DOI
https://doi.org/10.1177/14644207261508247
Primary Topic
Cellular and Composite Structures
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Architected metamaterials fabricated by 3D printing for enhanced compression strength and energy dissipation

Zhuyao Du, Jia He, Hu Sun, Rong Chen
3 links
Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications
Cellular and Composite Structures
article

Architected metamaterials fabricated by 3D printing for enhanced compression strength and energy dissipation

Zhuyao Du, Jia He, Hu Sun, Rong Chen
article en

Abstract

This study investigates the effect of arc count, the number of Schwarz Primitive (P) unit cells distributed around the circumference, on the mechanical response and energy absorption of hollow cylindrical TPMS structures. Five configurations (3, 5, 7, 9, and 11 arcs) were analyzed by finite element analysis, and the Arc 3 configuration was validated experimentally. Increasing the arc count from 3–11 raised the relative density from 0.196 to 0.268, the stiffness by 91.6%, and the effective modulus by 92.5%. The normalized modulus reached 54% to 75% of the axial upper bound, indicating predominantly axial load carrying with an efficiency that rose with arc count, and an empirical power law gave an exponent of 2.12 (R 2 = 0.993). All configurations entered the hardening region at 3.7–3.8% strain and showed no softening up to 13.25% strain. Specific energy absorption (SEA) rose by approximately 97.9% and toughness from 166 to 300 J/m 3 , with diminishing gains at higher arc counts. The force-response indicators, however, were non-monotonic: Arc 7 exhibited the highest behavior factor (1.16) and the lowest crush force efficiency (0.86), whereas Arc 3 showed the lowest behavior factor (1.07) and the highest crush force efficiency (0.93). The experimental response agreed with the simulation within 1% in force and stress at 5 mm and within 3.5% and 8.5% in SEA and toughness, respectively. Arc count is therefore an effective design variable for tailoring the stiffness and energy absorption of Schwarz-P cylinders, although gains in energy absorption and crushing-force uniformity do not necessarily occur together.

Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications
Shaanxi University of Technology (CN)
Industry, innovation and infrastructure
Cellular and Composite Structures
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon